Netgear ProSafe WAC740 Bruksanvisning

Netgear Åtkomstpunkt ProSafe WAC740

Läs gratis den bruksanvisning för Netgear ProSafe WAC740 (2 sidor) i kategorin Åtkomstpunkt. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 9 recensioner. Har du en fråga om Netgear ProSafe WAC740 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Installation

NETGEAR ProSAFE Dual Band Wireless AC

Access Point

WAC740

Set Up the Access Point

Before mounting the access point in a high location, ﬁrst set up and test the

access point to verify WiFi network connectivity.

IMPORTANT: You can deploy the WAC740 access point only in a WiFi

network that is managed by a ProSAFE wireless controller.

¾To cable the access point:

1. Connect an Ethernet cable from LAN port 1 on the access point to a

LAN port on a PoE+ switch, that is, an 802.3at-compatible switch.

2. Connect an Ethernet cable from the PoE+ switch to an Ethernet port on

the computer.

3. Check the LEDs to verify that the access point is set up correctly.

LED Description

Power LED

•O. Power is o.

•Solid green. Power is on.

•Alternating green and amber. The access point is receiving insucient

PoE power.

•Solid amber, then blinking amber. A self-test is running or ﬁrmware is

being loaded. During startup, the Power LED ﬁrst lights solid amber, then

goes o, and then blinks amber before turning solid green aer about

one minute. If aer two minutes the Power LED remains solid amber or

continues to blink amber, it indicates a system fault.

Activity LED

•O. No link with the network is detected.

•Solid green. A link with the network is detected.

•Blinking green. Network trac is detected.

Package Contents

Unpack the box and verify the contents:

• WAC740 ProSAFE Dual Band Wireless AC Access Point

• Category 5e Ethernet cable

• Ceiling mount kit

LED Description

LAN LED 1

•O. A 10 Mbps Ethernet link is detected or no Ethernet link is detected.

•Solid green. A 2.5 Gbps Ethernet link is detected.

•Solid amber. A 1 Gbps or 100 Mbps Ethernet link is detected.

If both LAN LED 1 and LAN LED 2 light solid green or amber, the LAN ports

are members of a link aggregation group (LAG).

LAN LED 2

•O. No LAG is detected.

•Solid green. A LAG with a 2.5 Gbps Ethernet link is detected.

•Solid amber. A LAG with a 1 Gbps or 100 Mbps Ethernet link is detected.

If both LAN LED 1 and LAN LED 2 light solid green or amber, the LAN ports

are members of a LAG.

2.4G WLAN LED

•O. The 2.4 GHz WiFi radio is o.

•Solid green. The 2.4 GHz WiFi radio is on.

•Blinking green. WiFi activity is detected on the 2.4 GHz WiFi radio.

5G WLAN LED

•O. The 5 GHz WiFi radio is o.

•Solid green. The 5 GHz WiFi radio is on.

•Blinking green. WiFi activity is detected on the 5 GHz WiFi radio.

The access point uses a DHCP client that is enabled by default. If your network

includes a DHCP server, the access point obtains an IP address from the DHCP

server. If your network does not include a DHCP server, the access point sets

its IP address to a static IP address of 192.168.0.160.

If your network includes a DHCP server, note the following:

• Make sure that Option 43 is enabled on the DHCP server.

• Make sure that the DHCP server speciﬁes the IP address of the wireless

controller in the required hexadecimal format in the Option 43 ﬁeld.

For example, if the IP address of the wireless controller is 192.168.0.250,

you must enter the hexadecimal string 02:04:C0:A8:0:FA.

To compose the address, start with 02:04: and then add each of the four

address octets in hexadecimal format, separated by colons.

The ﬁrst two octets (02:04) deﬁne a standalone NETGEAR wireless

controller, or in a stack, the ﬁrst wireless controller in the stack.

Produktspecifikationer

Varumärke:	Netgear
Kategori:	Åtkomstpunkt
Modell:	ProSafe WAC740
Vikt:	726 g
Bredd:	197 mm
Djup:	197 mm
Höjd:	40 mm
LED-indikatorer:	LAN, Link, Power
Placering:	Ceiling, Table, Wall
Snabbstartsguide:	Ja
MAC-adressfiltrering:	Ja
Antennanslutning:	SMA
Maximal dataöverföringshastighet:	1700 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
Antal kontakter:	4
Produktens färg:	Vit
Monteringssats:	Ja
Datahastighet för Ethernet-LAN:	10,100,1000 Mbit/s
Strömförsörjning via Ethernet (PoE) stöd:	Ja
Antal LAN (RJ-45) anslutningar:	2
Strömförbrukning (vanlig):	17.9 W
VLAN-stöd:	Ja
AC-inspänning:	12 V
Kryptering/säkerhet:	802.1x RADIUS, EAP, PEAP, SSH, SSL/TLS, WPA, WPA2
Kabel inkluderad:	LAN (RJ-45)
Likströmsingång:	Ja
Maximal överföringshastighet för trådlöst LAN:	1733 Mbit/s
Automatiskt trådlöst distributionssystem (WDS):	Ja
Webbaserad adminstraion:	Ja
Antenn ökningsnivå (max):	6 dBi
Kommunikationsstandarder:	IEEE 802.11ac, IEEE 802.11i, IEEE 802.3af, IEEE 802.3at
Funktioner för Service Set Identifier (SSID):	SSID-sändning på/av
Intern:	Nej
Produktvikt (oz):	Ja
Typ av kabellåsanslutning:	Kensington
Ingående ström:	2.5 A
Wi-Fi Multimedia (WMM)/(WME):	Ja
Auto MDI / MDI-X:	Ja