Netgear WGR614v4 Bruksanvisning

Läs gratis den bruksanvisning för Netgear WGR614v4 (2 sidor) i kategorin Router. Guiden har ansetts hjälpsam av 38 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 4 recensioner. Har du en fråga om Netgear WGR614v4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Installation Guide

Follow these quick steps to install your router.

Before you begin, locate the broadband Internet configuration settings

from your cable company. You can also consult the Install Assistant on the

Resource CD for 54 Mbps Wireless Router.

1

1

Connect the Router

a.Turn off your computer and cable or DSL modem.

b.Disconnect the Ethernet cable from your computer (A) which

connects to your cable or DSL modem.

c.Connect the Ethernet cable from your cable or DSL modem to

the nternet pot (A) on theIr WGR614.

d. Connect the Ethernet cable which came with the router from a

Local port on the router (B) to your computer.

e. Turn on the cable or DSL modem and wait about 30 seconds for

the lights to stop blinking.

f.After turning on the modem and waiting for it to synchronize

with the network, turn on the router.

g. Now, turn on your computer. If software usually logs you in to

your Internet connection, do not run that software or cancel it if

it starts automatically.

h. Verify the following:

When you turn the router on, the power light goes on.

If the power light on the router is not lit, check to

make sure the power cord is plugged in and that the

power outlet is turned on if it is controlled by a wall

switch or power strip.

The local lights are lit for any connected computers. If

no local lights are lit, check to make sure the Ethernet

cable is securely connected at the router and at the PC

and that the PCis turned on.

The Internet light is lit, indicating a link has been

established to the cable or DSL modem. If the Internet

light is not lit, check to make sure the Ethernet cable is

securely connected at the router and at the cable or

DSL modem and that the modem is turned on.

Note:For wireless placement and range guidelines, and wireless

configuration instructions, please see the Reference Manualon

the Resource CD for 54 Mbps Wireless Router.

Cable or DSL modem

2

2

Log In to the Router

Note:To connect to the router, your computer needs to be

configured to obtain an IP address automatically via DHCP. For

instructions on how to do this, please see Appendix C in the

Reference Manualesource CD for 54 Mbps Wireless Routeron the R.

a. Connect to the router by typing in the addresshttp://192.168.0.1

field of Internet Explorer or Netscape

®

Navigator.

b. For security reasons, the router has its own user name and

password. When prompted, enter for the router useradmin

name and for the router password, both in lower password

case letters.

Note:The user name and password are not the same as any user

name or password you may use to log in to the Internet.

3

3

Connect to the Internet

a. You are now connected to the router. If you do not see the menu

above, click the Smart Wizard link on the upper left of the

main menu.

b. Click Nextto follow the steps in the Smart Wizard to input the

router configuration settings. See the green ISP Guide for help

with identifying your ISP settings.

A

54 Mbps Wireless Router

v4

54 Mbps Wireless Router

WGR614

Cable or DSL modem

4

A

54 Mbps Wireless Router

WGR614

Cable or DSL modem

B

Produktspecifikationer