Noctua NF-A6x15 5V Bruksanvisning
Noctua
kylsystem för dator
NF-A6x15 5V
Läs gratis den bruksanvisning för Noctua NF-A6x15 5V (2 sidor) i kategorin kylsystem för dator. Guiden har ansetts hjälpsam av 37 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 19 recensioner. Har du en fråga om Noctua NF-A6x15 5V eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
NOCTUA NF-A6x15 5V
INSTALLATION MANUAL
Scan this code to display
multilingual manuals on
your phone.
Installation
This document includes some instructions for installing,
running and cleaning your NF-A6x15 5V.
Should you encounter any difficulties, please
check the FAQs on our website (faqs.noctua.at)
and don’t hesitate to contact our support team at
support@noctua.at.
Multilingual versions of this manual are available on our
website: www.noctua.at/manuals
1
Dear customer,
Congratulations on choosing the Noctua NF-A6x15 5V.
We at Noctua always strive to achieve superior quiet cooling
performance regardless of whether it’s a big 200mm fan
or a small 40mm one. That’s why the NF-A6x15 5V sports
many of the features and advanced aerodynamic design
measures of our award-winning larger models, making it
perhaps the most thoroughly optimised 60mm fan on the
market.
Each Noctua fan is double-checked for flawless operation
by our quality control team before it leaves the factory and
I’m confident that you will be able to sense some of the
research, attention and care we’ve put into making this
product.
Enjoy your NF-A6x15 5V!
Yours sincerely,
Roland Mossig, Noctua CEO
Included mounting parts:
If you replace an existing 60mm fan with the NF-A6x15 5V
in devices such as storage or network solutions, it is usually
best to use the screws (or other mounting mechanism)
used for the original fan.
Depending on the application, it may also be possible to
use the supplied mounting screws or silicone anti-vibration
mounts.
Caution: Being a 5V fan, the NF-A6x15 5V can not be run
at 12V and will be damaged when used with typical 12V
power sources such as PC motherboard fan headers.
For installing the fan using the NA-AV2 mounts, please
first pull the F side through the fan’s mounting holes and
then pull the C side through the mounting holes of the
case:
Using the OmniJoin
TM
adaptor set
3
The supplied OmniJoin™ adaptor set allows you to easily
connect the NF-A6x15 5V to proprietary fan headers if you
want to replace a 60mm fan in devices such as network or
storage solutions.
Please first identify the individual leads of the OmniJoin™
adaptor and the original fan. The OmniJoin™ adaptor uses
black for ground (GND) and red for +5V.
The black lead of the adaptor has to be matched with
the original GND lead and the red adaptor cable with the
original +5V lead. Many fan cables use the same colours
as the OmniJoin™ adaptor, but please note that there is
no guarantee for this, so make sure to correctly identify the
GND and +5V leads of the original fan. Please refer to the
manual that came with the device or contact the device
manufacturer if in doubt.
If the long ends of the mounts are in the way, you can use
scissors to cut them after installation. Note that this will
then make them difficult to reinstall in the future.
NA-EC2
30cm extension cable
4x NA-AV2
anti-vibration mounts
NA-AC7
USB power adaptor cable
OmniJoin™ adaptor set
4x fan screws
After you’ve identified the individual leads, please proceed
with the following steps to install the OmniJoin
TM
adaptor:
Make sure to correctly
identify the GND and
+5V leads of the
original fan!
Cable connectors
GND
+5V
OmniJoin
TM
adaptor
Connector of the original fan
Connection
2
The NF-A6x15 5V features a standard 3-pin fan connector.
However, please note that the fan can also be connected to
standard 4-pin fan headers.
If you would like to run the fan on USB power sources
such as devices with USB host ports, power banks or USB
power supplies, please use the included NA-AC7 USB
power adaptor cable. Please note that the NA-AC7 must be
used exclusively with the NF-A6x15 5V fan because using
it with other fans bears the risk of damaging sensitive USB
host devices.
If you would like to connect the fan to other fan headers,
please use the supplied OmniJoin™ adaptor set as
described below.
The fan features a short 20cm primary cable in order to
help you minimise cable clutter in typical applications. If
you need a longer cable, please add the supplied 30cm
extension (NA-EC2).
F = fan side C = case side
Produktspecifikationer
| Varumärke: | Noctua |
| Kategori: | kylsystem för dator |
| Modell: | NF-A6x15 5V |
Behöver du hjälp?
Om du behöver hjälp med Noctua NF-A6x15 5V ställ en fråga nedan och andra användare kommer att svara dig
kylsystem för dator Noctua Manualer
13 Augusti 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
15 Juli 2025
15 Juli 2025
14 Juli 2025
kylsystem för dator Manualer
- DeepCool
- Savio
- Zalman
- Tracer
- Asus
- AeroCool
- BitFenix
- Thermalright
- Antec
- SilentiumPC
- Gamdias
- Arctic Cooling
- FSP
- Cooler Master
- ModeCom
Nyaste kylsystem för dator Manualer
11 Oktober 2025
10 Oktober 2025
5 Oktober 2025
5 Oktober 2025
1 Oktober 2025
30 September 2025
30 September 2025
30 September 2025
30 September 2025
26 September 2025