Noctua NM-AMB12 Bruksanvisning
Noctua
ej kategoriserat
NM-AMB12
Läs gratis den bruksanvisning för Noctua NM-AMB12 (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 2 recensioner. Har du en fråga om Noctua NM-AMB12 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
NOCTUA NM-AMB12
INSTALLATION MANUAL
Scan this code to display
multilingual manuals on
your phone.
0
Standard position (no offset)
0
Offset position
-7mm
-7mm
Once you have screwed the offset mounting bars to
the backplate, proceed by applying thermal paste and
installing the cooler to the mounting bars, as described in
the manual that came with the cooler.
Required mounting parts:
NM-AMB12a
mounting bar
NM-AMB12b
mounting bar
4x NM-APS4
grey plastic spacers
(not included)
4x NM-ALS1
long screws
(not included)
AMD stock backplate
(pre-installed on the motherboard)
Caution: Make sure that the “CPU
→
” markings point
towards the CPU and that the NM-AMB12a bar with the
“NORTH” marking is installed on the north (top) side of the
socket and the NM-AMB12b bar with the “SOUTH” marking
is installed on the south (bottom) side of the socket.
Fix the offset bars using the screws that came with the
cooler.
Caution: Gently tighten the screws until they stop, but do not
use excessive force (max. torque 0.6 Nm).
Offset position
Standard position
(no offset)
On other AM4 CPUs, or if there are any compatibility
issues in the offset position (e.g. clearance with
motherboard heatsinks), please choose the standard
position (0).
If your CPU cooler is already installed, please rst
unscrew it from the original mounting bars. Then,
unscrew the original mounting bars from the backplate
and remove them.
If your CPU cooler is not yet installed, please rst
remove the motherboard’s heatsink retention module
and put the plastic spacers over the threads of the
motherboard’s backplate, as described in the manual
that came with the cooler.
On AM5 and Ryzen 5000/3000 series AM4 CPUs,
choose the -7mm offset hole position to ensure optimal
contact quality and performance.
Installing the mounting bars
1
Install the offset mounting bars as shown below:
Caution
!
Produktspecifikationer
| Varumärke: | Noctua |
| Kategori: | ej kategoriserat |
| Modell: | NM-AMB12 |
Behöver du hjälp?
Om du behöver hjälp med Noctua NM-AMB12 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Noctua Manualer
14 Juli 2025
14 Juli 2025
ej kategoriserat Manualer
- Hyundai
- Royal Catering
- NUX
- RGBlink
- Parkside
- Lenovo
- Wiesenfield
- Blodgett
- BEKO
- Motorola
- Makita
- Proaim
- Rockville
- Arctic
- Leviton
Nyaste ej kategoriserat Manualer
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025