Oricom Rock Light Bruksanvisning

Läs gratis den bruksanvisning för Oricom Rock Light (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7.5 recensioner. Har du en fråga om Oricom Rock Light eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
User Guide
Rock Light
For the full Product and Warranty Information, please scan QR code or
visit www.oricom.com.au
Need help? Contact Oricom Support
If you need assistance setting up or using your Oricom product now or in the
future, call Oricom Support.
Australia (02) 4574 8888
Mon-Fri 8am – 6pm AEST
New Zealand 0800 67 42 66
Mon-Fri 10am – 8pm NZST
Specifications:
LED POWER: 5W
LED Qty per fitting: 3pcs
Lumens: 428Lm (Real lumen)
Voltage: 9-24V
IP Rating: IP68, IP69K
Nuts and bolts: stainless steel
Length of cables: 1.5M
Operating temperature: -40°C~145°C
Pack Contents:
1 x Rock light
1 x Standard base with stainless bolts, lock nuts and washers
1 x User guide
Mounting and Installation:
The most common areas to install Oricom Rock Lights, include; Sides of
vehicle, under sills, front and rear corners, underneath trays, inside boot or
bonnet compartment, roof racks etc.
Once you have established where the rock lights are to be installed, secure
them in place, then secure the wires, and connect the red power input wire to
the positive battery/power terminal. Connect the black ground wire to the
negative battery terminal or a factory grounding point. If you choose to use a
switch you will need to route the wiring via the switch before connecting to
power.
Standard Base Mounting Bolt

Produktspecifikationer

Varumärke: Oricom
Kategori: Inte kategoriserad
Modell: Rock Light

Behöver du hjälp?

Om du behöver hjälp med Oricom Rock Light ställ en fråga nedan och andra användare kommer att svara dig