Oricom VISO10 Bruksanvisning


Läs gratis den bruksanvisning för Oricom VISO10 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 9 recensioner. Har du en fråga om Oricom VISO10 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
3
2
Pa Part A- LCD rt B- Buon
A1: Day of the Week
A2: Radio Control Icon
A3: Time
A5: Date
A6: Year
B1: MODE/
”Buon
B2: ” Buon
B3: “RESET” Buon
B4: ” Buon
B5: WAVE/
Buon
Part C- Structure
C1: Hanging Hole
C2: DoorBaery
C3: Stand
1
VISO10 User Manual
1. Features
- and Understand Time displayEasy to Read
- Calendar Perpetual Up to Year 2099
- & 8 languages Day of week Month in user
selectable
2. Unit Appearance
5. Lock buttons
● Hold “ ” (B4) buon at the same me for (B2) and
5 seconds to lock the rest buons. When rest buons’
funcons been locked, icon “ ” displayed. Hold “
(B2) and ” (B4) buon 5 seconds again to unlock.
6. Precauons
7. Express Warranty (Australia)
This Express Warranty is provided by Oricom Internaonal Pty
Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South
Windsor NSW 2756, herein aer referred to as “Oricom”.
Oricom products come with guarantees that cannot be exclud-
ed under the Australian Consumer Law. You are entled to a
replacement or refund for a major failure and compensaon
for any other reasonably foreseeable loss or damage. You are
also entled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not
amount to a major failure.
3. Getng started:
● Open the battery Cover (C2).
● Insert 2 x AA size alkaline batteries observing polarity [“+”
and “–“marks]. There is “click” sound when insert batteries
to remind user the batteries was inserted correctly.
● Replace the battery compartment cover.
● Place the unit onto flat surface; the unit is ready for
use now.
4. Time Setng
4.1 Manual Time Setng:
● In me display, hold “MODE/ ” buon (B1) for 3
seconds to enter Clock/Calendar seng Mode.
● The seng sequence is shown as follow:, Weekday & Month
Language, 12/24 Hr, RCC (Radio Clock) ON/OFF, Time Zone,
Hour, Minute, Year, Month, Day, DST.
● There are 8 languages, English, German, French, Spanish,
Italian, Dutch, Polish and Swedish, for day-of-week & Month.
Press (B2) or ” (B4) buon to adjust the seng and
press “MODE” buon (B1) to confirm each seng.
(By keeping the (B2) or (B4) buon pressed, could
accelerate the process and reach the desired value more
quickly)
To do this:
1) In me display, hold “MODE/ ” Buon (B1) for
3 seconds to enter Clock/Calendar seng Mode.
2) Press (B2) or ” (B4) buon to navigate to the
RCC (Radio Clock) ON/OFF seng.
3) Ensure that RCC is set to RCC OFF inside of Australia.
4) Confirm the selecon by clicking the “MODE/
Buon (B1).
4.2 Radio Controlled Time:
● The Radio Controlled Time seng on the VISO10 will not
work in Australia. Ensure this is turned off in the sengs.
● The clock loses its me informaon when the baery is
removed.
● Use a pin to press the reset buon if the Unit does not
work properly.
● Do not expose it to direct sunlight, heavy heat, cold, high
humidity or wet areas.
● Never clean the device using abrasive or corrosive materials
or products. Abrasive cleaning agents may scratch plasc
parts and corrode electronic circuits.


Produktspecifikationer

Varumärke: Oricom
Kategori: Inte kategoriserad
Modell: VISO10

Behöver du hjälp?

Om du behöver hjälp med Oricom VISO10 ställ en fråga nedan och andra användare kommer att svara dig