PAC APH-TY02 Bruksanvisning

Läs gratis den bruksanvisning för PAC APH-TY02 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 4 recensioner. Har du en fråga om PAC APH-TY02 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Speaker Connection Harness for Select

Toyota and Lexus Vehicles with Factory Ampliers

Equipped with a 30-pin Dock-n-Lock Connector

APH-TY02

C

Page 1

Copyright © 2019. All rights reserved. PAC is a Power Brand of AAMP Global.

PAC-audio.com

Rev: V1

Date: 010419

APH-TY02-HAR

1

15

16

30

Yellow

BrowWhiten /

Black

Orange

Red

Pink

Brown /wYello

Blue

Green

Purple

White

Grayd/ Re

Brown

WhitRede /

Gray

ReBlackd /

Pink / Black

Browne / Blu

Black

Orangek / Blac

Brown

Blue / Black

GreeBlackn /

Purplek / Blac

WhitBlacke /

GraBluey /

BrowBlackn /

White / Blue

Gray / Black

Yellow

161

3015

Blue / Black

GreeBlackn /

Purplek/ Blac

WhitBlacke /

GraBluey /

Brown/Black

White e/Blu

Gray/Black

Pink / Black

Orangek/ Blac

ReBlackd /

Browne/ Blu

Brown

Black

Yellow Yellow

BrowWhiten /

Black

Pink

Orange

Red

Brown / Yellow

Blue

Green

Purple

White

Gray / Red

Brown

WhitRede /

Gray

Introduction and Features

The APH-TY02 simplies speaker wire connections when adding aftermarket ampliers. Aftermarket ampliers can

be easily added with no need to cut or modify a vehicle’s original wiring. Each pair of wires has been labeled with the

corresponding speaker name.

Wiring Overview

Installation Notes

1. It is always best to use a tone generator (PAC part number: TL-PTG2) to verify that the tables in this manual, and the labels

on the wires, match the wiring in your specic vehicle.

2. The 30-pin Dock-n-Lock connector from the APH-TY02 must be connected to the factory amplier when using a PAC AmpPRO

Interface.

3. Not all applicable vehicles will come equipped with a corresponding speaker for all of the wires populated in our harness. It is

important to understand which speakers are equipped in your vehicle.

4. If you are leaving any of the factory speakers connected to the factory amplier, simply connect the speaker wires (color for

color) between the male and female connectors, for the speakers that will be powered by the factory amplier. For example:

If you want the rear speakers to be powered by the factory amplier, simply connect the Green, Green / Black, Purple and

Purple / Black wires from the male connector to the Green, Green / Black, Purple and Purple / Black wires from the female

connector.

5. For vehicles that lose audio output when there is no load on the speaker outputs of the factory amplier, PAC load resistors

will be required (PAC Part Number LR335 or LR475).

1. Locate the vehicle’s factory amplier and disconnect the 30-pin Dock-n-Lock connector.

2. Connect the APH-TY02 harness to the connector that was disconnected in the previous step.

3. Connect the male connector from the APH-TY02 to the amplier.

4. Connect the longer loose wires from the APH-TY02, to your aftermarket amplier or passive crossovers, according to the

tables in this manual.

5. Insulate unused wires in the 30-pin connector that plugs into the factory amplier side of the APH-TY02.

Installation Steps

Connect to aftermarket amplier

or passive crossover

16

GraySpear +ke12

1

Gray / BckSpear -lake12

17

Whi / RedSpear +teke11

2

Whi / BlueSpear -teke11

18

BrownSpear +ke10

3

Brown / BcklaSker -pea10

19

Gray / RedSpear 9 +ke

4

Gray / BlueSker 9 -pea

20

WhiteSpear 8 +ke

5

Whi / BcktelaSker 8 -pea

21

PurpleSpear 7 +ke

6

Purple / BcklaSker 7 -pea

22

GrnSpear 6 +eeke

7

Grn / BckeelaSker 6 -pea

23

BlueSpear 5 +ke

8

Blue / BcklaSker 5 -pea

24

Brown / RedSpear 4 +ke

9

Brown / BlueSker 4 -pea

25

PinkSpear 3 +ke

10

Pin/ Bckk laSker 3 -pea

26

RedSpear 2 +ke

11

Red / BlackSker 2 -pea

27

OraeSpear 1 +ngke

12

Orae / BcknglaSker 1 -pea

28

B ckla

13

B ckla

29

Brown /hite W

14

Brown

30Ye owll

15Ye owll

Spear 1ke

Pass thr (Gr)oughound

Pass thr (Cstt v)oughonan12

Spear 6ke

Spear 5ke

Spear 4ke

Spear 3ke

Spear 2ke

Spear 11ke

Spear 10ke

Spear 9ke

Spear 8ke

Spear 7ke

Pin NumrWire ColorWires DeriptionbescLabel

Spear 12ke

Pass through

Pass through

Insulate any unused wires

Produktspecifikationer