PAC CH1A-RSX Bruksanvisning

Läs gratis den bruksanvisning för PAC CH1A-RSX (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2 recensioner. Har du en fråga om PAC CH1A-RSX eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Radio Replacement and Steering Wheel Control

Interface for Chrysler/Dodge/Jeep Vehicles

© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.

PAC-audio.com

C

Page 1

CH1A-RSX

Rev:1

Date: 092718

Introduction and Features

Important Notes

Wiring Connection Chart

Illustration / Schematic

The CH1A-RSX interface allows the replacement of a factory radio in select Chrysler / Dodge / Jeep vehicles with MSCAN

or LSFT-CAN databus radios. Using this interface will retain factory features such as steering wheel controls (SWC)

vehicle entertainment system (VES) and the factory audio amplier when the original radio is removed. Use of this

interface also allows you to program two radio functions to each SWC button by using short press long press dual

command functionality. The CH1A-RSX also provides data bus driven outputs such as retained accessory power (RAP),

vehicle speed sensor (VSS), illumination, reverse trigger and parking brake.

1. These instructions only apply to revision 1.5.4.5 of the product. The revision info can be found on a small white sticker on the

interface and packaging.

2. The radio select rotary switch on the side of the interface must be adjusted to the proper radio setting before plugging the

interface into the vehicle (see next page for setting chart).

3. The interface comes pre-programmed for all of the vehicles factory SWC functions and does not require programming unless

you wish to re-assign the SWC functions or utilize short press long press dual command functionality. The SWC can always

be restored to default settings by pressing and releasing the program button on the side of the interface once and waiting 7

seconds for the LED to ash 4 times.

4. The LED will ash whenever a SWC button is pressed.

Red / WhiteParking Brake

Output (-)

Purple / WhiteVehicle Speed

Output (VSS)

Blue / WhiteAmp Turn On Input

RedAccessory Output

Output (10 amp)

Orange / WhiteIllumination Output

(+)

GreenReverse Output (+)

Interface Connector

YellowBattery +12v

Black Ground

BlueAntenna On Input

WhiteFront L + input

White / BlackFront L - input

GrayFront R + input

Gray / BlackFront R - input

GreenRear L + input

Green / BlackRear L - input

PurpleRear R + input

Purple / BlackRear R - input

Vehicle ConnectorSWC Connector

Blue / YellowKenwood, Newer

JVC

3.5mm JackAlpine, JVC,

Clarion, Fusion,

Pioneer, Sony,

Dual, Axxera,

Lightning Audio,

Jensen, Rockford

Fosgate

Aftermarket Radio

Connections

Vehicle

Connector

SWC Connection

See above chart for

different radio type

connections

Acc On/

Programming

LED

Programming

Button

WiringSWC Connection

Produktspecifikationer