Pro-Ject CD Box RS2 T Bruksanvisning
Pro-Ject
Inte kategoriserad
CD Box RS2 T
Läs gratis den bruksanvisning för Pro-Ject CD Box RS2 T (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 5 recensioner. Har du en fråga om Pro-Ject CD Box RS2 T eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
INSTRUCTIONS FOR USE
Pro-Ject CD Box RS2 T
© Pro-Ject Audio Systems · Pro-Ject CD Box RS2 T · Revision 9. . 201 06 12
2
Dear music lover,
thank you for purchasing a P -Ject Audio Systems CD player. ro
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Caution! Laser diode, discs to avoid, safety instructions
This product contains a laser diode. Refer all servicing to qualified personnel.
If a disc is cracked, chipped, warped, or otherwise damaged, don't risk to play it. You could end up
damaging the unit. This player is designed for use with fully circular, full size CDs only. Use of shaped discs
is not recommended. The manufacturer and the distributor disclaims all liability arising in connection with
the use of damaged or shaped discs.
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily
accessible at all times. Never handle the device, the power supply while your hands are wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such
as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never
place any naked flame sources, such as lighted candles on or near the device. The product shall not be used
in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
Make all connections whilst the CD player is disconnected from the power supply.
Never use any other power supply than the one supplied with the unit - except suitable Pro-Ject
Power Box RS device.
Connection to an external D/A-converter
Use one of the available S/PDIF outputs (Coaxial, Optical and AES/EBU) or I2S to connect the CD player to
a D/A converter or AV processor.
I2S connection is made for connection with Pre Box RS2 Digital only. It includes also masterclock from
the DAC and ensures the best possible performance.
Mains power connection
Connect the low voltage plug from the power supply to the socket of the unit connecting
P
P
P
PPower
ower
ower
ower ower 20V
20V
20V
20V20V b
b
b
bbefore
efore
efore
efore efore
the power supply to the mains.
© Pro-Ject Audio Systems · Pro-Ject CD Box RS2 T · Revision 9. . 201 06 12
3
Inserting and removing a disc
Open the top lid and remove the magnetic clamp. Insert the disc with the label side facing upwards, place the
magnetic clamp on the disc and close the lid. After display shows the total number of tracks on the “Reading”
disc and the total duration of the disc. Unit must be powered on for disc loading.
Front panel controls
Power on/Standby
The lever switch on the front panel of the unit turns the power on or off. The blue LED on the front panel lits
when unit is on. You can put the device via remote control in standby mode as well as turn it on again. Please
note that hereon the lever switch must be in the up position.
Dimming the display
Use button "mode" on the remote control to change brightness - 10steps and display scheme: Black
background + white font and vice versa.
Play
starts playback of the first track. The display shows the current track number, the elapsed time of the current
track and the play icon.
Pause
pauses playback. The display shows the current track number, the elapsed time of the current track and
the pause icon.
To resume playback press again.
Stop
A short press of the button stops playback. The display shows the total number of tracks on the disc, the
total duration of the disc an the stop icon. d
Stepping between tracks
Press the buttons (previous track) or (next track).
Pressing while playback, the current track starts playing from the beginning.
The display shows the number of the tracks as you step, the elapsed time of the current track and the step icon.
Scanning through the disc
Press and hold the button (fast backward) or (fast forward) to scan through the disc. The display shows
the current track number, the elapsed time of the current track and the scan icon.
Releasing or will take you back to playback.
Produktspecifikationer
| Varumärke: | Pro-Ject |
| Kategori: | Inte kategoriserad |
| Modell: | CD Box RS2 T |
Behöver du hjälp?
Om du behöver hjälp med Pro-Ject CD Box RS2 T ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Pro-Ject Manualer
24 September 2024
12 September 2024
22 Augusti 2024
19 Augusti 2024
18 Augusti 2024
18 Augusti 2024
15 Augusti 2024
6 Augusti 2024
5 Augusti 2024
4 Augusti 2024
Inte kategoriserad Manualer
- Perfecta
- Chipolino
- Danby
- Weihrauch Sport
- Velbus
- Korona
- Holman
- Keurig
- SIG Sauer
- Plum
- CVW
- Helix
- Vello
- INTIMINA
- Ultimate Support
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025