Proel SW18A Bruksanvisning

Läs gratis den bruksanvisning för Proel SW18A (6 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 7 recensioner. Har du en fråga om Proel SW18A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

USER MANUAL

SW18A

acve subwoofer

KEY FEATURES

• High power compact subwoofer • Bass-reex Direct Radiang Subwoofer

• Small size for a good output-toweight rao • 96KHz / 40 bit oang point CORE processing with PRONET remote control

• Digitally controlled Class D amplier module with SMPS

INTRODUCTION

The SW18A is a high power compact subwoofer designed to partner ED series point

source loudspeakers for xed installaons in discotheques, nightclubs and bars, and

live music clubs, and for portable corporate audio-visual applicaons. It features

a high excursion 4” voice coil, 18” driver equipped with a double centred spider

that maintains linear voice coil travel even at high output levels. The phenolic birch

plywood cabinet is equipped with pole mount socket, stacking feet, ush handles,

and heavy duty wheels to enable easy handling and transportaon.

The SW18A subwoofer system is equipped with a high power 18” (460mm)

transducer capable of long excursion (up to 30mm peak-to-peak), controlled by

high sness Double Silicon Spider as centering suspension and by heavy duty

surround. The motor structure features high strength (BL²/Re) with opmized

symmetry and excursion controlled by Inner Flux Demodulang Ring. The robust

copper 100mm (4”) voice coil is wounded in two dierent layers both outside and

inside the coil support, then doubling the coil surface exposed to air cooling and

consequently improving the long term thermal capacity of the loudspeaker. Cones

are made of very high-sness glass ber reinforced paper, featuring also invisible

water repellent treatment.

The powered SW18A features an integrated 2000 wa class D amplier module

that provides convenience and simplicity of connection for portable sound

reinforcement applicaons, and also for xed installaons in discotheques and

live music clubs. It will deliver punchy bass performance from a very compact cabinet, and thanks to the integral pole mount socket partners well

with any of the ED series of point source loudspeakers in portable corporate audio-visual applicaons, while its small size enables it to be easily

ed into ght venue spaces.

TECHNICAL SPECIFICATION

Acouscal

Amplier Type

Class D with Variable Switching Frequency

and SMPS

System typeBass-reex

Transducer

18” (460 mm), 4” (100 mm) VC 8 ohm,

High sness, water repellent, glass bre

reinforced cone

Flux Demodulang Ring VC

Double Centering Spider Suspension

Output Power2000 W

Mains Voltage Range (Vac)230 V~ ±15% or 115 V~ ±15% 50/60 Hz

Mains ConnectorPowerCon® (NAC3MPA + NAC3MPB)

Consumpon*700 W (nominal) 1700 W (max)

IN / OUT ConnectorsNeutrik XLR-M / XLR-F

Frequency response (-6 dB)36 Hz – 100 Hz (Processed)IN / OUT Network ConnectorsETHERCON® (NE8FAV)

Maximum Peak SPL @ 1m132 dBMechanical

ElectricalWidth650 mm (25.6”)

Input Impedance20 kΩ balancedHeight500 mm (19.7”)

Input Sensivity+4 dBu / 1.25 VDepth564 mm (22.2”)

Signal ProcessingCORE processing, 96kHz / 40bit oangDepth Including Wheels672 mm (26.5”)

point SHARC DSP, 24 bit AD/DA convertersConstrucon15 mm Phenolic Birch Plywood

Direct access Controls4 Presets: Standard, InfraSub, Cardioid, User.PaintBlack textured paint (or White)

Network Terminaon, GND LinkWheels4 heavy-load 80 mm ø

Remote ControlsPRONET control sowareTransport2 handles

Network protocolCANBUSNet Weight42.5 Kg (93.7 lbs.)

* Nominal consumpon is measured with pink noise with a crest factor of 12

dB, this can be considered a standard music program.

revision 2017-07-18

Produktspecifikationer