ResMed ClimateLine MAX Oxy Bruksanvisning
ResMed
ej kategoriserat
ClimateLine MAX Oxy
Läs gratis den bruksanvisning för ResMed ClimateLine MAX Oxy (43 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2 recensioner. Har du en fråga om ResMed ClimateLine MAX Oxy eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/43
1English
ClimateLine
™
/ ClimateLine
MAX ™
/ ClimateLine
MAX™
Oxy
air tubing
User Instructions
English • Deutsch • Français • Italiano • Español • Português • Nederlands • Svenska • Dansk • Norsk • Suomi •
简体中文 • 繁體中文
English
Thank you for choosing the ClimateLine, ClimateLine
MAX
or ClimateLine
MAX
Oxy (hereafter
‘ClimateLine’) air tubing. The ClimateLine is heated air tubing that delivers the desired temperature
at the mask and enables you to use Climate Control. Climate Control maintains humidity at
comfortable levels. Please read this entire user instructions before using your air tubing.
Note: The ClimateLine is designed for use only with the H5i. If you are using the S9 without the
H5i, please use your SlimLine or Standard air tubing.
Setup
1. Remove the rubber cover from the rear of the H5i.
2. Align the ClimateLine with the ClimateLine connection port so that the lock symbol is facing
up. Push the ClimateLine firmly onto the air outlet.
3. Rotate the ClimateLine clockwise until it clicks into place.
4. Connect the assembled mask system to the free end of the ClimateLine air tubing. Refer to
your S9 Welcome Guide for general setup information.
2 31 4
368880_ClimateLine_Global_Multi.indd 1 5/12/2012 2:09:49 PM
2
If you use the ClimateLine
MAX
Oxy with supplemental oxygen, perform the following steps in
addition to the ones described above:
1. Remove the cap from the oxygen connector.
2. Connect the oxygen supply tubing to the oxygen connector. Ensure that it is attached firmly.
1 2
Notes:
• Before adding oxygen, familiarize yourself with the specific warnings relating to the use of
supplemental oxygen. These can be found at the end of your S9Information Guide.
• If you use the ClimateLine
MAX
Oxy without supplemental oxygen, ensure that the cap of the
oxygen connector is attached firmly.
Climate Control
Climate Control is an intelligent system that controls the H5i and the ClimateLine to deliver
constant, comfortable temperature and humidity levels during therapy. Designed to prevent
dryness of the nose and mouth, it automatically maintains the temperature and relative humidity
while you sleep.
Climate Control modes
Climate Control Auto
The recommended (default) setting for Climate Control is Auto mode. In
Auto mode, you have the ability to adjust air temperature (61-86°F (16-30°C))
depending on preference. Based on your selected air temperature, Climate
Control automatically adjusts the humidifier output to maintain a constant,
comfortable humidity level of 80% relative humidity while protecting against
rainout. In Auto mode the default air temperature is set to 80°F (27°C).
368880_ClimateLine_Global_Multi.indd 2 5/12/2012 2:09:53 PM
Produktspecifikationer
| Varumärke: | ResMed |
| Kategori: | ej kategoriserat |
| Modell: | ClimateLine MAX Oxy |
Behöver du hjälp?
Om du behöver hjälp med ResMed ClimateLine MAX Oxy ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat ResMed Manualer
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025
ej kategoriserat Manualer
- Fisher Paykel
- Koala
- Western Digital
- Shure
- Craftsman
- Meireles
- Ansmann
- Omnitronic
- Gtech
- Practixx
- Wilbur Curtis
- OnTruss
- Narwal
- Flex
- Be Quiet!
Nyaste ej kategoriserat Manualer
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025
28 Augusti 2025