Russound ALT-70V-50 Bruksanvisning


Läs gratis den bruksanvisning för Russound ALT-70V-50 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 30 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 15.5 recensioner. Har du en fråga om Russound ALT-70V-50 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
Intruduction
Thank you for purchasing the ALT-70V-50 volume control
from Russound. The ALT-70V-50 is designed to work
with commercial audio systems using either 70V or 100V
amplication. Its manufactured with a high-quality
autoformer design for long life, excellent frequency response,
low heat build-up, in an easy-to-install package
Considerations
Amplier Type – The ALT-70V-50 can only be used with 70V or
100V ampliers Wattage Rating – The maximum wattage for
speakers being controlled by the ALT-70V-50 is 50 watts. For
the total would be 30 watts which is acceptable. If those
same 4 speakers were tapped at 15 watts each, the total
would be 60 watts and this would exceed the power rating of
this volume control.
Installation Location The ALT-70V-50 is designed for
indoor use but may be installed outdoors if used with a
properly designed weatherproof device cover.
ALT-70V-50
Volume Control
Installation Manual
Specications
Power Handling: Up to 50 Watts total
Number of Steps: 11
Wire Gauge: Up to 12 ga AWG
Insertion Loss: <0.5 dB
White, light almond, ivoryIncluded Colors:
Fits 1 Gang UL/CSA Approved 18 ci Junction Box
Wiring a single speaker
Wiring a multiple speakers
IN
OUTGROUND
Amplier
Speaker OUT
Volume Control Speaker IN
COM 25 70 100
IN
OUTGROUND
Amplier
Speaker OUT
Volume Control Speaker IN
COM 25 70 100
Speaker IN Speaker IN Speaker IN


Produktspecifikationer

Varumärke: Russound
Kategori: Inte kategoriserad
Modell: ALT-70V-50

Behöver du hjälp?

Om du behöver hjälp med Russound ALT-70V-50 ställ en fråga nedan och andra användare kommer att svara dig