Satco 64-142 Bruksanvisning
Läs gratis den bruksanvisning för Satco 64-142 (17 sidor) i kategorin Smart hem. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 5.5 recensioner. Har du en fråga om Satco 64-142 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/17
LED
RGBTW
INDOOR/OUTDOOR
TAPE
LIGHTS
Models: 64-100, 64-110, 64-111, 64-120, 64-121, 64-130, 64-131, 64-132,
64-133, 64-134, 64-135, 64-140, 64-141, 64-142, 64-143, 64-144, 64-145
INSTALLATION
AND
SAFETY
INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING: Risk of Fire or Electric Shock
• This tape lighting
is
only intended to be used with the products provided
in
the kit.
• Installation requires knowledge of luminaries electrical systems.
If
not qualified,
do
not attempt installation. Contact
a qualified electrician.
•
To
reduce risk of fire and over-heating, secure
all
connections.
• TURN
OFF
the electrical power before proceeding.
• The electrical rating of this product
is
120V/60Hz.
• The grounding and banding of the system shall be done
in
accordance with National Electric Code
(NEC)
Article
600
and local codes.
•
To
prevent wiring damage or abrasion,
do
not expose wiring to edges of sheet metal
or
other sharp objects.
• Do not damage any PCB conductive parts, squeeze or fold the LED tape light when installing.
•
Pay
attention to positive and negative polarities before installation, otherwise the
LED
tape light may be damaged.
• Prevent static electricity when installing. Avoid damp or wet exposure.
• This device
is
not intended for use with emergency exits.
CUTTING
Applies to indoor models only 64-100, 64-110, 64-
111,
64-
120,
64-121,
64-130,
64-131
, 64-132, 64-133, 64-
134,
64-135.
• Always disconnect the power supply before cutting.
LED
strips can
be cut as indicated
in
diagram.
Indoor Installation
"-
X
I
X
I
Applies to models 64-100, 64-110, 64-
111
, 64-120, 64-121, 64-130,
64-131
, 64-132, 64-133, 64-134, 64-135.
STEP
1:
Clean surfaces carefully
(free from grease and dust)
before installing to ensure that the
double sided tape or adhesive
sticks properly to the surface.
Wood, powder-coated, structured
surfaces, glass, stainless steel etc.
are not recommended locations.
STEP
2:
Gently peel off the tape,
the adhesive tape may tear by
over stretching.
© Copyright 2023 Satco Products, Inc. 1/23 v1.3
STEP
3:
Wearing an anti-static
ring, gently press PCB areas.
Do not press down on the
actual LEDs.
STEP
4:
Be careful to not step
on the
reel
if you unreel the
entire strip before installation.
Sa
t
co
Pr
oduc
ts, Inc.
Bren
twoo
d, NY
11
717
Produktspecifikationer
| Varumärke: | Satco |
| Kategori: | Smart hem |
| Modell: | 64-142 |
Behöver du hjälp?
Om du behöver hjälp med Satco 64-142 ställ en fråga nedan och andra användare kommer att svara dig
Smart hem Satco Manualer
22 September 2025
22 September 2025
21 September 2025
21 September 2025
Smart hem Manualer
- NuvoMed
- Elro
- Strong
- Hombli
- KKT Kolbe
- IKEA
- Lotus
- DCU
- Dometic
- Milesight
- Trust
- Gigaset
- Bticino
- DoorBird
- Furman
Nyaste Smart hem Manualer
13 Oktober 2025
13 Oktober 2025
12 Oktober 2025
6 Oktober 2025
3 Oktober 2025
1 Oktober 2025
1 Oktober 2025
28 September 2025
27 September 2025
23 September 2025