Satechi Slim X2 Bruksanvisning


Läs gratis den bruksanvisning för Satechi Slim X2 (1 sidor) i kategorin Tangentbord. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 2.5 recensioner. Har du en fråga om Satechi Slim X2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
The keyboard can be used in wired mode by pressing
“Fn + Eject” while the cable is connected.
Press the Bluetooth keys to switch back to wireless
mode
5
Press “Fn + Esc” to swap between Media and Fn keys.
6
2-3h
To recharge, connect the keyboard to a powered
hours or until the red charging light turns green.
Power indicator light will ash green when on low
battery
4
Zzz
After 30 minutes of inactivity, the keyboard will go into
sleep mode to preserve battery.
Press any key to wake and the keyboard will
automatically connect.
3
3s
Press and hold one of the keyboard’s Bluetooth keys
for ~3 seconds, until the LED light starts to blink.
Select “Slim X2 Keyboard on the host device’s
Bluetooth settings to complete the pairing process.
Repeat for each button to connect up to four devices
2
To turn on the keyboard, move the switch on the top of
the keyboard to the “on” position.
The power indicator light should turn green for
~3 seconds, then turn o
1
SLIM X2 BLUETOOTH BACKLIT KEYBOARD
I N S T R U C T I O N A L G U I D E


Produktspecifikationer

Varumärke: Satechi
Kategori: Tangentbord
Modell: Slim X2

Behöver du hjälp?

Om du behöver hjälp med Satechi Slim X2 ställ en fråga nedan och andra användare kommer att svara dig