Satechi ST-AMBKM Bruksanvisning

Läs gratis den bruksanvisning för Satechi ST-AMBKM (1 sidor) i kategorin Tangentbord. Guiden har ansetts hjälpsam av 34 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8 recensioner. Har du en fråga om Satechi ST-AMBKM eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Zzz

The keyboard will go into sleep mode after ~30

minutes of inactivity.

Press any key to wake up.

6

The power indicator light will flash green when

battery is low. Plug in charging cable into

keyboard’s USB-C port and connect to a powered

USB port. Allow 2-3 hours for a full charge or until

red LED light turns o.

5

To toggle between connected Bluetooth devices,

press Bluetooth 1, 2, or 3 button. To remove saved

Bluetooth device, press Fn + Shift (left) + Delete.

4

On the host device, look for “Satechi Bluetooth

Keyboard” and connect to pair.

The blue LED light will stop blinking, indicating a

successful pairing.

3

3s

2-3h

To assign a Bluetooth device, press and hold one

of the keyboard’s Bluetooth buttons for ~3 seconds

until blue LED light is flashing.

You can assign up to

3 Bluetooth devices.

2

Turn on your Wireless Keyboard.

The power indicator light should turn green for ~3

seconds, then turn o.

1

NOTE: USE INCLUDED USB-C CABLE TO FULLY CHARGE YOUR KEYBOARD BEFORE FIRST USE

WIRELESS KEYBOARD

INSTRUCTIONAL GUIDE

Produktspecifikationer