Shadow SH 941 Bruksanvisning
Shadow
Inte kategoriserad
SH 941
Läs gratis den bruksanvisning för Shadow SH 941 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 6 recensioner. Har du en fråga om Shadow SH 941 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
Sensor
4. Locate the output socket in a convenient location on the instrument and attach with applied double sided adhesive4. Locate the output socket in a convenient location on the instrument and attach with applied double sided adhesive
1. Test fit sensors into the slot between the wing and foot.
Pickup should t tightly for best output (see g 1).
1. Test fit sensors into the slot between the wing and foot.
Pickup should t tightly for best output (see g 1).
2. If pickup is too loose, shim with included shim material (see fig 2). If pickup is too high, file the bridge slot slightly.2. If pickup is too loose, shim with included shim material (see fig 2). If pickup is too high, file the bridge slot slightly.
3. Install the sensors into the bridge slots.3. Install the sensors into the bridge slots.
5. Connect to appropriate amplifier with instrument cable.5. Connect to appropriate amplifier with instrument cable.
Copper Foil
Tape
Fax: (561) 743 0460
eMail: jjmelch@shadow-pickups.com
Shadow Elektroakustik
Peter-Haendel Straße 2
91334 Hemhofen · Germany
Shadow Electronics of America Inc.
17791 Alexander Run
Jupiter, FL 33478 U.S.A.
Fax: +49 - 91 95 - 92 99 30
eMail: info@shadow-electronics.com
Content:Content:
Fig. 2Fig. 2
Fig. 1Fig. 1
Violin Twin Bridge Pickup,
Cable holder,
Integrated Volume and tone control,
12 foot cable,
Copper Foil Tape
Violin Twin Bridge Pickup,
Cable holder,
Integrated Volume and tone control,
12 foot cable,
Copper Foil Tape
Installation Instruction for Shadow SH 941
Violin Twin Bridge Pickups
Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we recommend
an amplier with low impedance input.
Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we recommend
an amplier with low impedance input.
Produktspecifikationer
| Varumärke: | Shadow |
| Kategori: | Inte kategoriserad |
| Modell: | SH 941 |
Behöver du hjälp?
Om du behöver hjälp med Shadow SH 941 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Shadow Manualer
10 September 2024
9 September 2024
8 September 2024
8 September 2024
7 September 2024
7 September 2024
7 September 2024
7 September 2024
6 September 2024
6 September 2024
Inte kategoriserad Manualer
- Acard
- Sagemcom
- Masport
- Boss
- Raidsonic
- Duracell
- Starlink
- Longvie
- Luxman
- Algo
- Waeco
- Cilio
- OXO Good Grips
- Cambo
- VCM
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025