Shadow SH-SV1 Bruksanvisning

Läs gratis den bruksanvisning för Shadow SH-SV1 (1 sidor) i kategorin mikrofon. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2 recensioner. Har du en fråga om Shadow SH-SV1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sensor

Copper Foil

Sensor

Fax: (561) 743 0460

eMail: [email protected]

Shadow Elektroakustik

Peter-Haendel Straße 2

91334 Hemhofen · Germany

Shadow Electronics of America Inc.

17791 Alexander Run

Jupiter, FL 33478 U.S.A.

Fax: +49 - 91 95 - 92 99 30

eMail:[email protected]

Montageanleitung für Shadow SH SV1

Violin-Transducer

Inhalt:Inhalt:

Fig. 3Fig. 3

Fig. 1Fig. 1Fig. 2Fig. 2

1.Test fit sensor into the slot between the wing and foot. Pickup should fit tightly for best output (see Fig. 1). Pickup can

also be mounted between the bridge feet and body (see Fig. 2).

1.Test fit sensor into the slot between the wing and foot. Pickup should fit tightly for best output (see Fig. 1). Pickup can

also be mounted between the bridge feet and body (see Fig. 2).

Note:

Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we

recommend an amplifier with low impedance input.

2.Install the sensors into the bridge slot.

3.Locate the output socket in a convenient location on the instrument and attach with applied double sided adhesive.

2.Install the sensors into the bridge slot.

3.Locate the output socket in a convenient location on the instrument and attach with applied double sided adhesive.

Installation into the slot between the wing and the foot.

If pickup is too loose, shim with included shim material (see Fig. 2). If pickup is too tight, file the bridge slot slightly.

Installation into the slot between the wing and the foot.

If pickup is too loose, shim with included shim material (see Fig. 2). If pickup is too tight, file the bridge slot slightly.

transducer disc (12mm diameter)

output socket (6,3mm) with Velcro

copper foil

transducer disc (12mm diameter)

output socket (6,3mm) with Velcro

copper foil

Produktspecifikationer