Shure UHF-R Bruksanvisning

Shure Inte kategoriserad UHF-R

Läs gratis den bruksanvisning för Shure UHF-R (32 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 5 recensioner. Har du en fråga om Shure UHF-R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/32

Model UHF-R

Wireless Systems User Guide

27A20023 (Rev. 4)

Printed in U.S.A.

Model UHF-R

Wireless Systems User Guide

UR1M Micro bodyPack Transmitter

Shure UHF-R Wireless

WARNING:

Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualied service personnel. The

safety certications do not apply when the operating voltage is changed from the factory setting.

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventila-

tion and install in accordance with the manufacturer’s instructions.

8. DO NOT install near any heat sources such as open flames, radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open

flame sources on the product.

9. DO NOT defeat the safety purpose of the polarized or groundingtype plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two blades

and a third grounding prong. The wider blade or the third prong are provided for your

safety. If the provided plug does not fit into your outlet, consult an electrician for replace-

ment of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs, conve-

nience receptacles, and the point where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified by the manu-

facturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long

periods of time.

14. REFER all servicing to qualified service personnel. Servicing is required when the ap-

paratus has been damaged in any way, such as power supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with

liquids, such as vases, on the apparatus.

16. The MAINS plug or an appliance coupler shall remain readily operable.

17. The airborne noise of the Apparatus does not exceed 70dB (A).

18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a

protective earthing connection.

19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture.

20. Do not attempt to modify this product. Doing so could result in personal injury and/or

product failure.

21. Operate this product within its specified operating temperature range.

This symbol indicates that dangerous voltage constituting a risk of

electric shock is present within this unit.

This symbol indicates that there are important operating and mainte-

nance instructions in the literature accompanying this unit.

English

Contents

Important Safety Instructions ............................................................................................................................................................... 2

Feature Overview ................................................................................................................................................................................ 4

System Components ........................................................................................................................................................................... 5

Receiver Controls and Connectors ...................................................................................................................................................... 6

Receiver LCD Interface ...................................................................................................................................................................... 7

Receiver Parameters ........................................................................................................................................................................... 7

Connecting Multiple Receivers to the RF Distribution Ports ................................................................................................................. 8

Automatic Frequency Selection ........................................................................................................................................................... 9

Networking Receivers ........................................................................................................................................................................ 10

Handheld and Bodypack Transmitter Controls and Connectors ....................................................................................................... 11

Transmitter LCD Interface ................................................................................................................................................................. 12

Transmitter Batteries ......................................................................................................................................................................... 12

Transmitter Parameters ..................................................................................................................................................................... 13

Setting Transmitter Gain .................................................................................................................................................................... 13

RF Safety Mode ................................................................................................................................................................................. 13

Automatic Transmitter Sync .............................................................................................................................................................. 14

Troubleshooting ................................................................................................................................................................................. 15

Specifications .................................................................................................................................................................................... 16

Replacement Parts and Accessories ................................................................................................................................................. 19

UHF-R Wireless System Compatibility Guide ................................................................................................................................... 21