Smart-AVI XT-TX800 Bruksanvisning

Läs gratis den bruksanvisning för Smart-AVI XT-TX800 (2 sidor) i kategorin AV extender. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 9 recensioner. Har du en fråga om Smart-AVI XT-TX800 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

© Copyright 2007 Smart-AVI, All Rights Reserved

Notice

The information contained in this document is

subject to change without notice. Smart-AVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties of

merchantability and fitness for any particular

purpose.

Smart-AVI will not be liable for errors contained herein

or for incidental or consequential damages in

connection with the furnishing, performance or use

of this material.

No part of this document may be photocopied,

reproduced or translated into another language with

out prior written consent from Smart-AVI.

For the complete manual, visit www.smartavi.com.

Use CAT5 cable to broadcast high

resolution SXGA, Stereo Audio, RS232

and IR to 8 stations up to 1000ft

away.

XT-800

www.smartavi.com

User Manual

2840 N. Naomi Ave.

Burbank, California 91504

Phone: (818) 565-0011

Facsimile: (818) 565-0020

Technical Specifications

3MART!UDIO6IDEO)NTEGRATION

3MART!UDIO6IDEO)NTEGRATION

SNOITACIFICEPS008-TXSNOITACIFICEPS008-TX

SNOITACIFICEPS008-TX

SNOITACIFICEPS008-TXSNOITACIFICEPS008-TX

ataDAGVataDAGV

ataDAGV

ataDAGVataDAGV

tamroFSBVC,C/Y,VUY,BsGR,VHBGR

noituloseR

0021x0091otpU

)AGXS,AGX,AGVS,AG

V

epytrotcennoCtekcos51DH

oiduAoiduA

oiduA

oiduAoiduA

epyTlangiSdecnalabnuoeretS

rotcennoCtekcoskcajmm5.3

rewoPrew

oP

rewoP

rewoPrewoP

stnemeriuqeRA5.@CDV5

rotcennoC)ev+retnec(kcajCDmm1.2

lacisyhPlacisyhP

lacisyhP

lacisyhPlacisy

hP

snoisnemiD)sgephtiw1.3(mc7.2x8.11x22

thgieWsbl5.3

Sending an RS232 command to remoteSending an RS232 command to remote

Sending an RS232 command to remoteSending an RS232 command to remote

Sending an RS232 command to remote

monitormonitor

monitormonitor

monitor

In order to send a command to a remote monitor, you

will need to use The following query at 9600 baud

rate;

<CR>//M1<CR>

 After sending this query, any command sent from

the PC will go directly to monitor 1

 To send a command to monitor 2 replace "M1"

with "M2" etc...

 To send the same command to all monitors ( but

only monitor 1 will answer) Use the following

command;

<CR>//M0<CR>

*

<CR> = Carriage return

InOutInOut

RS232

Out1-8

IR

Produktspecifikationer