Somfy GDK 3000 Bruksanvisning

Läs gratis den bruksanvisning för Somfy GDK 3000 (2 sidor) i kategorin fjärrkontroll. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2 recensioner. Har du en fråga om Somfy GDK 3000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
I - Détacher la tête moteur
I - Remove the motor head
REMPLACER LE MOTORÉDUCTEUR DU GDK 3000/4000 - REPLACE GDK 3000/4000 GEARED MOTOR
II - Enlever le motoréducteur
II - Remove the geared motor
1
Ouvrir complètement la
porte de garage.
door.
2
verrouiller la porte de garage.
Unlock the garage door.
Lors du débrayage de la motorisation, un mauvais équilibrage de la porte
peut entrner des mouvements brusques pouvant repsenter un danger.
WARNING
When releasing the motorisation, an incorrect balance may result in sudden
movements which may be dangerous.
AVERTISSEMENT
3
brancher le moteur de lalimentation secteur.
Disconnect the motor from power supply.
4
visser le rail.
Retirer la te moteur.
Unscrew the rail.
Remove the motor head.
5
Enlever la grille de protection et dévisser
l’ampoule.
Enlever le sur-capot de la te moteur.
visser puis enlever le capot de la tête moteur.
Remove the protective grid and the bulb.
Remove the upper cover.
Unscrew and remove the motor head cover.
1
Retirer la feuille plastique.
Remove the plastic cover.
2
brancher lesls.
Unplug the wires.
Repérer la position desls.
Mark the position of the wires.
3
visser et enlever le
motoréducteur.
Unscrew and remove the geared
motor.
5132027A
Ne pas jeter votre produit mis au rebut avec les déchets ménagers. Vous avez la
responsabilité de remettre tous vos déchets d’équipement électronique et électrique en
les déposant à un point de collecte dédié pour leur recyclage.
Do not dispose of the product with household waste at the end of its life. Use your local
authority’s special waste collection services.
III - Installer le nouveau motoréducteur
III - Install the new geared motor
1
Positionner le nouveau
motoréducteur : le pignon
s’enclenche.
Visser le motoréducteur.
Place the new geared motor: the
pinion snaps into place.
Screw the geared motor.
2
Rouge / Red
Vert / Green
Brancher lesls.
Plug the wires.
Attention au sens de branchement.
Be careful about the wiring position.
3
Installer la feuille plastique.
Install the plastic cover.
IV - Réinstaller la tête moteur
IV - Reinstall the motor head
1
Installer le capot sur la tête moteur puis le visser.
Installer le sur-capot sur la tête moteur.
Visser lampoule puis installer la grille de
protection.
Fit and screw the cover on the motor head.
Fit the upper cover.
Insert the bulb andt the protective grid.
2
Remettre la tête moteur
Visser le rail.
Fit the motor head.
Screw the rail.
3
Verrouiller la porte de garage.
Lock the garage door.
4
Brancher le moteur à l’alimentation secteur.
Connect the motor to power supply.
Somfy SAS
50 avenue du Nouveau Monde
BP 152 - 74307 Cluses Cedex
France
www.somfy.com
Somfy SAS, capital 20.000.000 Euros, RCS Annecy 303.970.230 -12/2016

Produktspecifikationer

Varumärke: Somfy
Kategori: fjärrkontroll
Modell: GDK 3000

Behöver du hjälp?

Om du behöver hjälp med Somfy GDK 3000 ställ en fråga nedan och andra användare kommer att svara dig