Sonnet Solo10G SFP+ V2 Bruksanvisning
Sonnet
nätverkskort/adapter
Solo10G SFP+ V2
Läs gratis den bruksanvisning för Sonnet Solo10G SFP+ V2 (4 sidor) i kategorin nätverkskort/adapter. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2 recensioner. Har du en fråga om Sonnet Solo10G SFP+ V2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
SFP+ V2 PCIe Card
Quick Start Guide
You Should Have
The following items should be included in your product package:
• Solo10G® SFP+ V2 PCIe Card
• Low-profile PCIe bracket
• Quick start guide
The following item may be required for installation:
• Medium Phillips screwdriver
Computer Compatibility
• Mac Pro 2023, 2019
• PC desktop or server
OS Compatibility
• macOS 13, 14.4+
• Windows 11; Server 2025, 2022,
• Linux®
Kernel 6.1, 6.12
Thunderbolt™ Compatibility
• Mac (Intel® or M series) or PC via a Thunderbolt-to-PCIe Card
Expansion System
System Requirements
Solo10G SFP+ V2 PCIe Card requires the following to operate:
• One LC/LC fiber optic cable
Driver Information
The drivers that enable the Solo10G card to work with Mac and
Windows computers must be downloaded from Sonnet’s website;
instructions follow.
Driver and Configuration Information—Linux
The drivers that enable the Solo10G card to work with Linux
are installed as part of Linux Kernels 6.1 and 6.12., though a later
version of the drivers may be available. Please go to https://www.
sonnettech.com/support/kb/kb.php, navigate to and click the
Solo10G SFP+ V2 PCIe Card link. Locate and click the Driver
category link, and then locate, click, download, and install the
appropriate drivers.
The steps necessary to configure the Sonnet card with your
computer may vary based on the version of Linux running.
Sonnet recommends using whatever method or tools you would
normally use for configuring any onboard ports.
Support Note: We recommend you make a backup of
important information on your system’s current storage drive(s)
prior to installing new hardware or software.
When handling computer products, take care to prevent components
from being damaged by static electricity; avoid working in carpeted
areas. Handle expansion cards only by their edges and avoid
touching connector traces and component pins. Also, avoid touching
components inside your computer.
Support Note: This document was up to date at the time of
printing. Please heck the Sonnet website for the
latest documentation.
1. Go to www.sonnettech.com/support/kb/kb.php
2. Navigate to and click the Solo10G SFP+ V2 PCIe Card link.
3. Click the Manual link.
4. Click the Solo10G SFP+ V2 PCIe Card Quick Start Guide [English] link,
and then check the Document Version information. If the version
listed is later than this document (revision A, click the Download
Now button for the latest version.
2
Installation and Configuration Steps for Mac Users
Card Installation Steps
1. Shut down your computer or Thunderbolt-to-PCIe card
expansion system and disconnect it from its power source,
and then open it to access the expansion card area (PCIe slots);
refer to the user’s manual for specific information.
2. Locate an available p2-x8 (8-lane) or x16 (16-lane) PCI Express
slot and remove its access cover.
3. Remove the Sonnet card from its packaging, and then install
it into the card slot; make sure the card is firmly seated and
secured.
4. Close your computer or expansion system, and then
reconnect it to its power source. If the card is installed in
an expansion system, also connect the Thunderbolt cable
between the Thunderbolt ports on the system and computer.
5. Connect a cable between the transceiver in the Solo10G card
and the transceiver on the switch or device.
6. Turn on your computer:
Basic Card Configuration Information
Configure the Solo10G card in the System Preferences Network
preferences panel; it will be identified as a PCI Ethernet card.
Performance Tuning Steps
Listed below are steps required to configure the Solo10G card for
maximum performance.
1. Open System Preferences, and then click Network. In the
Network System Preferences panel, click the Solo10G card’s
ports in the le panel, and then click Advanced; a new panel
appears.
2. In the Advanced panel, click Hardware. From the Configure
drop-down menu, select “Manually”. In the Speed drop-
down menu, leave the setting at 10G… In the Duplex
drop-down menu, select “full-duplex” (not “full duplex, flow-
control”). In the MTU drop-down menu, select “Custom,”
and then enter “9000” in the box below.
3. When you’ve completed changing the settings, click OK.
4. Back in the main Network window, click Apply aer you’ve
completed changing the settings.
Driver Download and Installation Steps
This section describes the download and installation of the
drivers required to support Solo10G SFP+ V2 PCIe Card with
your Mac computer. Windows users should skip to the page 4.
1. Launch a web browser and go to https://www.sonnettech.
com/support/kb/kb.php.
2. Navigate to and click the Solo10G SFP+ V2 PCIe Card link.
3. On the Solo10G SFP+ V2 PCIe Card page, click the Driver
link, and then click the arrow next to macOS driver
soware to display important information. Aer reading the
information, click the Download Now button; the soware
will be downloaded.
4. Double-click the .dmg you downloaded; the file will expand
and a new window will open.
5. Double-click the SonnetEthernet-10GE.pkg file to launch the
driver installer. Follow the on-screen instructions to install
the soware.
6. Aer you click Install Soware, an alert will appear; click
Open System Settings, NOT the highlighted OK button;
this will open Privacy & Security (or Security & Privacy) in
System Settings.
7. In the Privacy & Security window, find the statement that
System soware from developer “Sonnet Technologies, Inc.”
has been updated, and then click the Allow button next to it;
another alert will appear.
8. In the Privacy & Security alert, enter your password and
then click Modify Settings. Another alert will appear
instructing you to restart your computer; click Restart to
restart your system and finish the driver installation.
Don’t Click OK!
Click Open System Settings Instead!
WARNING: Do NOT install the Solo10G card into your
computer until after you install the Sonnet drivers! Installing
the card before the drivers allows an incorrect Apple driver to load,
resulting in poor performance.
Support Note: In order to realize any performance increases,
the network switches and server to which the Solo10G card
is connected must all be configured to have jumbo frames enabled.
Produktspecifikationer
| Varumärke: | Sonnet |
| Kategori: | nätverkskort/adapter |
| Modell: | Solo10G SFP+ V2 |
Behöver du hjälp?
Om du behöver hjälp med Sonnet Solo10G SFP+ V2 ställ en fråga nedan och andra användare kommer att svara dig
nätverkskort/adapter Sonnet Manualer
27 September 2025
5 Augusti 2025
nätverkskort/adapter Manualer
- Devolo
- Lindy
- Elecom
- Legrand
- Axis
- Televés
- Sitecom
- Edimax
- Swissonic
- LevelOne
- EXSYS
- Cisco
- OvisLink
- StarTech.com
- Trendnet
Nyaste nätverkskort/adapter Manualer
28 September 2025
28 September 2025
28 September 2025
20 September 2025
19 September 2025
19 September 2025
10 September 2025
10 September 2025
10 September 2025
10 September 2025