Speaka SP-MM-1040 Bruksanvisning


Läs gratis den bruksanvisning för Speaka SP-MM-1040 (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Speaka SP-MM-1040 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Installationsanweisungen
Installation Instructions
Best.-Nr.: 3419449 (SP-MM-1040)
SPEAKA PROFESSIONAL MONITOR STANDFUSS
Item No.: 3419449 (SP-MM-1040)
SPEAKA PROFESSIONAL MONITOR STAND
Unterstützt VESA-Halterung
75x75
100x100
124.46 cm
(49”) MAX.
FACH/GEBOGEN
1-18
kg
Support VESA mount
75x75
100x100
124.46 cm
(49”) MAX.
FACH/CURVED
1-18
kg
Hinweis: Falls das Display nicht an
der gewünschten Position stoppt,
stellen Sie die Schrauben mit den
abgebildeten Werkzeugen ein.
Note: If the display does not stop
at your desired position, adjust the
screws using the tools as shown.
Hinweis: Nehmen Sie die Spannungseinstellung in diesem Schritt
vor und stellen Sie sicher, dass die VESA-Platte vor der Einstellung
in die höchste Position angehoben ist.
Note: Please adjust the tension at this step, making sure that the
VESA plate is raised to the highest position before adjusting.
Hinweis: Falls das Display
nicht an der gewünschten
Position stoppt, stellen Sie die
Schrauben wie abgebildet ein.
Note: If the display does not
stop at your desired position,
adjust the screws as shown.
KLEMMMONTAGE
für Schreibtische mit 10–85 mm Plattenstärke
CLAMP INSTALLATION
for 10~85mm thickness desks
Für Schreibtische mit
10–58 mm Plattenstärke

For 10~58mm
thickness desks
For 50~85mm
thickness desks
Für Schreibtische mit
50–85 mm Plattenstärke

Ziehen Sie
die beiden
Schrauben
abwechselnd
fest.
Alternately
tighten the
two screws.
Drehen Sie den Einstellknopf auf „1", um die
Tragkraft des Monitorarms auf 2–6 kg einzustellen.
Turn the dial to "1" to set the monitor arm
weight capacity to 2-6 kg.
Turn the dial to "2" to set the monitor arm
weight capacity to 6-11 kg.
Drehen Sie den Einstellknopf auf „2", um die
Tragkraft des Monitorarms auf 6–11 kg einzustellen.
Turn the dial to "3" to set the monitor arm
weight capacity to 11-18 kg.
Drehen Sie den Einstellknopf auf „3", um die
Tragkraft des Monitorarms auf 11–18 kg einzustellen.


Produktspecifikationer

Varumärke: Speaka
Kategori: ej kategoriserat
Modell: SP-MM-1040

Behöver du hjälp?

Om du behöver hjälp med Speaka SP-MM-1040 ställ en fråga nedan och andra användare kommer att svara dig