StarTech.com 2P6G-PCIE-SATA-CARD Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com 2P6G-PCIE-SATA-CARD (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 3 recensioner. Har du en fråga om StarTech.com 2P6G-PCIE-SATA-CARD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: November 11, 2021

Product Diagram (2P6G-PCIE-SATA-CARD)

Front View

PortFunction

1SATA Ports x 2

• Connect to the SATA Stoage DevicesPCIe SATA

Card SATA Cable using a

2PCIe p1-x1 Connector

• Connect the to the in PCIe SATA CardPCIe Slot

the Computer

Product Information

For the latest product information, technical specications, manuals, and Declarations

of Conformance, please visit:

www.StarTech.com/2P6G-PCIE-SATA-CARD

Package Contents

• PCIe SATA Card x 1

• Full-Prole Bracket (Installed) x 1

• Low-Prole Bracket x 1

• Quick-Start Guide x 1

Requirements

• Computer with an available PCIe slot (x1/2/4/8/16)

• Phillips Head Screwdriver

• SATA Cables

2 Port SATA 6Gbps PCIe Controller Card

Hardware Installation

Warning: PCIe Cards can be damaged by static electricity. Make sure that the

InstallerComputer Case is properly grounded before they open the or touch the

PCIe SATA Card. The should wear an when installing any InstallerAnti-Static Strap

computer component. If an is not available, discharge any built-up Anti-Static Strap

static electricity by touching a large for several seconds. Grounded Metal Surface

Only handle theby its edges and do not touch the gold connectors. PCIe SATA Card

Installing the Low-Prole Bracket

By default the is attached to the . Depending on Full-Prole BracketPCIe SATA Card

the system conguration it may be necessary to remove the to Full-Prole Bracket

replace with the (included).Low-Prole Bracket

1. Remove the 2x securing the , using a Phillips Head ScrewsFull-Prole Bracket

Phillips Head Screwdriver.

2. Remove the and replace with the Full-Prole Bracket Low-Prole Bracket

(included).

3. Install the 2x removed in step 1 and tighten, using a Phillips Head Screws Phillips

Head Screwdriver.

Installing the Card

1. Turn o the and any that are connected ComputerPeripheral Devices

(e.g. printers, external hard drives, etc.).

2. Unplug the from the rear of the and disconnect any Power CableComputer

Peripheral Devices that are connected.

3. Remove the from the . CoverComputer Case

Note: Consult the documentation that came with the for details about Computer

how to do this safely.

4. Locate an open (x1/2/4/8/16) and remove the corresponding PCIe SlotMetal Cover

PlateComputer CaseMetal Cover Plate from the rear of the . In most instances, the

is attached to the rear of the with a single . Computer CasePhillips HeadScrew

Save this for the next step. Phillips Head Screw

5. Gently insert the into the open (x1/2/4/8/16) and fasten PCIe SATA Card PCIe Slot

the to the rear of the , using the from BracketComputer CasePhillips HeadScrew

step 4.

6. Connect a maximum of 2 to the of the SATA Storage DevicesSATA PortsPCIe

SATA CardSATA Cables. using

7. Replace the from the that was removed in step 3.CoverComputer

8. Reconnect all of the that were disconnected in step 2.Peripheral Devices

9. Reconnect the to the rear of the .Power CableComputer

*Product may vary from images

1

2

Produktspecifikationer