StarTech.com IDE2SAT25 Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com IDE2SAT25 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 5 recensioner. Har du en fråga om StarTech.com IDE2SAT25 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

40 Pin Female IDE to SATA Converter

IDE2SAT25

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l’utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l’uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Packaging Contents

•1 x IDE to SATA Adapter

•1 x Y Cable (LP4 to LP4 + SP4)

•1 x SATA Cable

•1 x Instruction Manual

Features

•Fully compatible with Ultra ATA 133 specications

•Serial ATA 1.0 compliant

Installation

1. Connect the serial ATA cable and “Y” split cable to the IDE2SAT25.

2. Connect the Ultra ATA (40pin) to the Motherboard IDE connector.

3. Connect the other end of the Serial ATA cable to the Serial ATA

device.

4. Connect the other end of “Y” split power cable to the power

source.

5. Do not forget to connect a power cable to the hard disk.

Note: No driver is needed to install the IDE2SAT25. It only acts as a

bridge adapter between the Serial ATA and Ultra ATA interfaces.

Introduction

Thank you for purchasing a StarTech.com IDE2SAT25 IDE to Single

Port SATA Adapter. The IDE2SAT25 is a versatile solution, allowing

you to use newer 2.5’’ or 3.5’’ SATA hard drives with older IDE-only

motherboards. Its’ low prole size allows the adapter to plug

directly into the motherboard, making it ideal for small form factor

systems and preserving space within larger systems.

Ultra ATA (40-pin)

Power (from Y-split cable)

Serial ATA Data

Port

Instruction Manual

*actual product may vary from photos

Manual Revision: 01/26/2012

For the most up-to-date information, please visit: www.startech.com

Produktspecifikationer