StarTech.com KSLTAD Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com KSLTAD (2 sidor) i kategorin spår. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 7 recensioner. Har du en fråga om StarTech.com KSLTAD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: December 4, 2019 4:05 PM

Product Diagram (KSLTAD)

ComponentFunction

1Port Adapter

• Used in place of a stationary object to secure a

connected Device.

2Lock Slot

• Used to secure a Security Cable to the Port

Adapter.

Requirements

For the latest requirements, please visit www.startech.com/KSLTAD.

Package Contents

• Lock Slot Adapter x 1

• Alcohol Wipe x 1

• Adhesive Pad x 1

• Tube of Glue x 1

Installation

Notes: The Port Adapter is not recommend for use in high humidity conditions, on

glass, ceramic tile, or water absorbent materials.

The following surface types must have a primer applied before the Port Adapter can

be properly installed: copper, brass, or plasticized vinyl.

1. Position the Port Adapter on the surface you wish to mount it to.

Laptop Security Port Adapter

1

Note: Use a pencil to draw an outline around the Port Adapter. This will ensure that

you know the area you need to score using the Abrasive Pad.

2. Use the Abrasive Pad (included) to score the surface area you intend to mount the

Port Adapter on. Be careful to only score the surface that the Port Adapter will

cover.

3. Use the Alcohol Pad (included) to clean the scored surface prior to installation.

Allow the alcohol to dry before installing the Port Adapter on the surface.

4. Apply the Adhesive to the back of the Port Adapter.

5. Apply the adhesive side of the Port Adapter to the scored surface and hold for 30

seconds. It is recommended that the adhesive is applied at room temperature, 68

Fahrenheit (20 Celsius).

6. Before connecting a Security Cable to the Port Adapter, allow the adhesive at least

24 hours to bond to the surface.

Product Dimensions

2

Produktspecifikationer