StarTech.com P4DD46A2-KVM-SWITCH Bruksanvisning
StarTech.com
Växla
P4DD46A2-KVM-SWITCH
Läs gratis den bruksanvisning för StarTech.com P4DD46A2-KVM-SWITCH (1 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 6.5 recensioner. Har du en fråga om StarTech.com P4DD46A2-KVM-SWITCH eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
Hotkey Command Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: May 11, 2023
Dual Monitor KVM Switch - DisplayPort - 4K 60Hz
Product IDs
P2DD46A2-KVM-SWITCH
P4DD46A2-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/P2DD46A2-KVM-SWITCH
www.StarTech.com/P4DD46A2-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions
and can be used to initiate KVM Switch functions. A hotkey command sequence must
be initiated by the HK_LCode (HotKey Leading Code), followed by 1-2 additional
keystrokes. Successful hotkey command inputs result in a high-pitch beep. Unsuccessful
hotkey command inputs result in a low-pitched beep.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
HK_LCode
Option 1.1
• Scr Lck Scr Lck +
Option 1.2
To change the HK_LCode:
• HK_LCode + H + Esc, Caps, or F12
• Alternatively, press and hold the front for , until 2 beeps Host Selection Button PC2
are emitted, then press the desired leading hotkey of Scr Lck, ESC, Caps, or F12
Hotkey Command Function
HK_LCode 1 ~ 2 +
or
HK_LCode F1 ~ F2 +
• Select PC 1 or PC 2.
HK_LCode + W
• Disable the binding between PC (USB/Video) and Audio
when switching between PC 1 or PC 2.
• Allows switching of PC Ports USB and Video functions,
while Audio does not switch
HK_LCode + Q
• Enable the binding of PC (USB/Video) and Audio
switching.
• Audio will switch with the PC Ports USB and Video
functions.
• Enabled by default.
HK_LCode F5 ~ F6 +
• Audio Unbound: Selects only the audio and mic source
between PC 1 or PC 2, does not switch USB and Video
• Audio Bound: Select PC 1 or PC 2 and their respective
USB/Video/Audio Ports
HK_LCode + Up Arrow
Key
or
HK_LCode + Down
Arrow Key
• Select the next/previous PC Port.
• If Audio is unbound, the audio will not switch
HK_LCode + B • Disable the Beep that indicates HotKey Command
Inputs.
HK_LCode + S • Enable Autoscan.
• Press any key to stop the Autoscan function.
HK_LCode + H + “x”
• Dene the Autoscan time delay.
• “x” = 1 - 10sec, 2 - 20sec, 3 - 30sec, 4 - 40sec, 5
- 50sec, 6 - 60sec, 7 - 70sec, 8 - 80sec, 9 - 90sec, 0 -
100sec
Produktspecifikationer
| Varumärke: | StarTech.com |
| Kategori: | Växla |
| Modell: | P4DD46A2-KVM-SWITCH |
Behöver du hjälp?
Om du behöver hjälp med StarTech.com P4DD46A2-KVM-SWITCH ställ en fråga nedan och andra användare kommer att svara dig
Växla StarTech.com Manualer
30 December 2025
30 December 2025
30 December 2025
17 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024
16 December 2024
16 December 2024
Växla Manualer
- Kathrein
- Clas Ohlson
- Bosch
- Mercury
- Planet
- Velleman
- Goobay
- Comet
- Atlantis Land
- Mach Power
- Epiphan
- Axing
- B-tech
- GEV
- Extron
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
2 April 2025