StarTech.com PEX1394A2V2 Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com PEX1394A2V2 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 3 recensioner. Har du en fråga om StarTech.com PEX1394A2V2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: October 1, 2019 1:45 PM

Product Diagram (PEX1394A2V2)

Component Function

1Bracket Screws• Used to secure the to the . BracketCard

2Full Prole Bracket• Used to securely attach the to the CardHost

Computer.

3PCIe Connector• Used to connect the to a CardPCI Express Slot

on the .Host Computer

Requirements

For the latest requirements, please visit www.startech.com/PEX1394A2V2

• Phillips Head Screwdriver x 1

• Operating System

• Windows® 10, 8.1, 8, and 7

• Windows Server 2019, 2016, and 2012

• mac OS 10.13, 10.12, 10.11 and 10.10

• Linux® Ubuntu

Package Contents

• PCI Express FireWire Card x 1

• Full Prole Bracket (pre-installed) x 1

• Low Prole Bracket x 1

• Quick-Start Guide x 1

2 Port PCI Express 1394a FireWire Card

Installation

Warnings! PCI Express cards, can be severely damaged by static electricity. Be sure

that you are properly grounded before opening your computer case or touching your

card.

Be careful to handle the card by its edges and not the gold connectors.

1. Turn o the and all connected (e.g. printer, Host ComputerPeripheral Devices

external hard drives, etc.).

2. Unplug the from the .Power CableHost Computer

3. Remove the cover from the .Host Computer’s Case

Note: Refer to the documentation that came with your computer for further

information on how to properly remove the computer case.

4. Locate a and remove the .PCI Express SlotMetal Cover Plate

Note: Refer to the documentation that came with your computer for further

information on how to properly remove the metal cover plate.

5. Gently insert the on the into the .PCIe ConnectorCardPCI Express Slot

6. Using the screws removed from the and a Metal Cover PlatePhillips Head

Screwdriver Card, secure the to the rear of the computer case.

7. Place the cover back over the computer case.

8. Reconnect the power cable and to the and Peripheral DevicesHost Computer

power the On.Host Computer

Verifying Installation

The operating system will detect the presence of the card and automatically install the

necessary drivers.

Windows

1. Open the screen by right-clicking on , and then select Device ManagerComputer

ManageDevice Manager. In the screen, select Computer Management from the

left panel (For Windows 8, open the and select ).Control PanelDevice Manager

2. Expand the IEEE 1394 bus host controllers section. You should see the Texas

Instruments 1394 OHCI Compliant Host Controller in the list with no exclamation

points or question marks next to it.

1

2

3

Produktspecifikationer