StarTech.com PEX8S1050 Bruksanvisning


Läs gratis den bruksanvisning för StarTech.com PEX8S1050 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 7.5 recensioner. Har du en fråga om StarTech.com PEX8S1050 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 24, 2023 5:11 PM
Product Diagram (PEX8S1050)
Component Function
1DB62 Connector
Connects the 8-Port DB62 to DB9MX8
Breakout Cable Serial Adapter Card to the .
2PCI Express Connector
the on the .PCI Express Slot Host Computer
3JP1 PME Jumper
Used to enable or disable wake from sleep.
ENA = Enables wake from sleep. Move the plug
to cover the and middle pins.ENA
DIS = Disables wake from sleep. Move the plug
to cover the and middle pins.DIS
4
J5 Aux Power
Connector
Used to connect the Host Computers Power
Supply (4 Pin SP4/Floppy power connector).
5
JP5 Aux Power Source
Selector
Determines the voltage.DC Power Source
X5V DC Power Source= 5V from a connected
to the .JP5 Aux Power Connector
X12V DC Power Source = 12V from a
connected to the .JP5 Aux Power Connector
I12V PCI Express Slot = 12V from
(motherboard’s PCIe slot).
6
JP4 Power Over
External Connector
Enables or disables the power over Pin #58
on the 8-Port DB62 to DB9MX8 Breakout
Cable’s DB62 Connector.
GND Pin #58 = No power is supplied to on the
DB62 Connector.
PWR Pin #58 = Power is supplied to on the
DB62 Connector DC Power Source when a is
connected to . J5 Aux Power Connector
8 Port PCI Express RS232 Serial Adapter Card 16C1050
Requirements
For the latest requirements, please visit www.startech.com/PEX8S1050
Computer with an available PCI Express® slot (x1, x4, x8, or x16)
(Optional) External DC Power Source - Host Computer’s PSU
(Optional) DB62 to DB9MX8 Cable w/ Pin #58 as power source
Operating System (OS):
Windows® 7, 8, 8.1, 10 and 11
Tools
Small Phillips Head Screwdriver
Driver
You must download and install the Systembase Drivers, see Downloading the
Drivers section.
Hardware Installation
Warning: Serial Adapter Cards can be damaged by static electricity. Make sure that you are
properly grounded before you open your computer case or touch the . Serial Adapter Card
Only handle the by its edges and do not touch the gold connectors.Serial Adapter Card
Installing the Serial Adapter Card
1. Turn o the and any that are connected (e.g., Computer Peripheral Devices
printers, external hard drives, etc.).
2. Unplug the from the back of the and disconnect any Power Cable Computer
Peripheral Devices that are connected.
3. Remove the from the . Cover Computer Case
4. Locate an open (x1, x4, x8, or x16) and remove the corresponding PCI Express Slot
Metal Cover Plate Computer Case from the back of the .
5. Gently insert the into the open and fasten the Serial Adapter Card PCI Express Slot
Bracket Computer Case to the back of the .
6. Place the back onto the . Cover Computer Case
7. Connect the 8-Port DB62 to DB9MX8 Breakout Cable ( ) DB62 included to the
Connector Serial Adapter Card.on the
Note: The the 8-Port DB62 to DB9MX8 Cable’s Connector shell/exterior is not
grounded.
8. Tighten the two screws on the sides of the , securing the . DB62 Connector Cable
9. Connect up to 8 serial devices to the on the DB9MX8 Connectors DB62 to DB9MX8
Breakout Cable.
1
2
6
5
4
3


Produktspecifikationer

Varumärke: StarTech.com
Kategori: Inte kategoriserad
Modell: PEX8S1050

Behöver du hjälp?

Om du behöver hjälp med StarTech.com PEX8S1050 ställ en fråga nedan och andra användare kommer att svara dig