StarTech.com PEXUSB312C3 Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com PEXUSB312C3 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 5 recensioner. Har du en fråga om StarTech.com PEXUSB312C3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: May 25, 2022

Product Diagram (PEXUSB312C3)

PortFunction

1USB 3.1 Type-C Ports• Connect two USB 3.1 Gen 2 Enabled Devices

2Screws

• Secure the Low-Prole Full-Height Bracket orto

the PCIe Card (PCIe)

3PCIe x 4 Connector

• Connect the to the PCIe CardComputer

Motherboard

4SATA Power Connector

• (Optional) Connect a 15 Pin SATA Power

ConnectorUSB 3.1 to provide extra power to the

Type-C Ports

Requirements

For the latest requirements please visit: .www.startech.com/PEXUSB312C3

• PCIe Slot

• Phillips Head Screwdriver

• (Optional) SATA Power Source

2-Port USB 3.1 Card - 10Gbps per port - 2x USB-C - PCIe

Installation

Hardware

WARNING! PCIe Cards can be severely damaged by static electricity. Make sure

that you are properly grounded before you open the or touch the Computer Case

PCIe CardAnti-Static Strap . You should wear an when you install any computer

component. If an isn’t available, discharge any built-up static Anti-Static Strap

electricity by touching a large for several seconds. Only Grounded Metal Surface

handle the by its edges and don’t touch the gold connectors.PCIe Card

1. Ensure the is .Computer PowerO

2. Unplug the .Computer Power Cord

3. Remove the . Computer Cover

Note: For further information on how to remove the Computer Cover, refer to the

ManualComputer that came with the .

4. Remove the .Slot Bracket Holding Screw

5. Remove the corresponding or from an Full-Height Low-ProleSlot Bracket

available . PCIe Slot

6. Recongure the for Full-Height or Low-Prole installations. PCIe Card

a. Remove the two using a . ScrewsPhillips Head Screwdriver

b. Remove the. Bracket

c. Place the onto the new aligning the holes in the and the PCIe Card Bracket,Card

Bracket.

d. Insert the two through the and into . ScrewsPCIe Card Bracket

e. Tighten using a .Phillips Head Screwdriver

7. To install the , carefully align the with the PCIe CardCard’s PCIe x 4 Connector

selected on the Push the down rmly to ensure PCIe SlotMotherboard.PCIe Card

the is properly seated into the . PCIeCardPCIe Slot

8. (To provide extra power to the forcharging) Connect USB 3.1 Type-C Ports Device

a from the to the 15 Pin SATA Power ConnectorPower SupplySATA Power

ConnectorPCIe Card on the .

9. Replace the to secure the . Slot Bracket Holding ScrewPCIeCard

10. Replace the and reconnect the . Computer CoverPower Cord

2

4

1

3

Produktspecifikationer