StarTech.com PR12GIP-NETWORK-CARD Bruksanvisning

StarTech.com Nätverkskort/adapter PR12GIP-NETWORK-CARD

Läs gratis den bruksanvisning för StarTech.com PR12GIP-NETWORK-CARD (2 sidor) i kategorin Nätverkskort/adapter. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9 recensioner. Har du en fråga om StarTech.com PR12GIP-NETWORK-CARD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: October 12, 2023
Product ID
PR12GIP-NETWORK-CARD
Port/LED/Connector Function
1Bracket
Secures the card to the Host Computer Case
The is included Low Prole Bracket
2
Power Over Ethernet
(PoE) LED Indicator
Solid Green: PoE has been negotiated and power is
being supplied to the Powered Device
O: No power output has been negotiated
3Ethernet Port
Connect an to the Ethernet Cable Network Card
Supports 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps
Supports and IEEE 802.3at IEEE 802.3af
Right LED Indicator Link Speed is
Solid Green: 2.5Gbps
Solid Amber: 1Gbps
O: 10/100Mbps
Left LED Indicator Link Status is
Solid Green: Active link
Flashing Green: Activity
1-Port PCIe 2.5GBase-T Ethernet PoE Network Adapter Card - Intel
4PCIe 2.0 p1-x1 Connector Insert into a on the PCI Express Slot Host Computer
5
SATA Power
Connector
Connect from the SATA Power Host Computer’s
Power Supply
Required to enable Power over Ethernet (PoE)
Package Contents
Network Card x 1
Low Prole Bracket x 1
Quick-Start Guide x 1
Requirements
For the latest requirements, please visit: www.StarTech.com/PR12GIP-NETWORK-CARD
Host Computer with an available PCI Express 2.0 or greater slot (x1, x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING! Static Electricity PCI Express Cardscan severely damage . Ensure that
you are adequately before you open your or touch Grounded Host Computer Case
the . You should wear an or use anPCI Express Card Anti-Static Strap Anti-Static
Mat Anti-Static Strap when installing any Host Computer component. If an isn’t
available, discharge any built-up static electricity by touching a large Grounded
Metal Surface PCI Express Card for several seconds. Only handle the by its edges and
don’t touch the gold connectors.
1. Turn o the and any that are connected to it Host Computer Peripheral Devices
(e.g. printers, external hard drives, etc.).
2. Unplug the from the back of the .Power Cable Host Computer
3. Disconnect any that are connected to the .Peripheral Devices Host Computer
4. Remove the from the . Cover Host Computer Case
Note: Consult the documentation that came with the for details Host Computer
about doing this safely.
5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate
from the back of the . Host Computer Case
4
1
2
3
5


Produktspecifikationer

Varumärke: StarTech.com
Kategori: Nätverkskort/adapter
Modell: PR12GIP-NETWORK-CARD

Behöver du hjälp?

Om du behöver hjälp med StarTech.com PR12GIP-NETWORK-CARD ställ en fråga nedan och andra användare kommer att svara dig