StarTech.com PR42GI-NETWORK-CARD Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com PR42GI-NETWORK-CARD (2 sidor) i kategorin Nätverkskort/adapter. Guiden har ansetts hjälpsam av 40 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 7 recensioner. Har du en fråga om StarTech.com PR42GI-NETWORK-CARD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: January 9, 2023

Product Diagram (PR42GI-NETWORK-CARD)

Port/LED/ConnectorFunction

1Bracket

• Secures the card to the Host Computer Case

• The Full Prole Bracket comes pre-installed

• The Low Prole Bracket is included

24x Ethernet Ports

• Connect a Network Cable to the Network Card

• Supports 2.5 Gbps, 1 Gbps, 100 Mbps, and 10 Mbps

Note: Ethernet port 1 (P1) is the only port that

supports WoL (Wake-on-LAN).

3LED Indicators

• LeftLED Indicator is Link Speed

• Solid Green: 2.5 Gbps

• Solid Amber: 1 Gbps

• O: 100 or 10 Mbps

• RightLED Indicator is Link Status

• Solid Green: Active link

• Flashing Green: Activity

4PCIe 2.0 p1-x4 Connector• Insert into a PCI Express Slot on the Host Computer

4-Port 2.5GBase-T Ethernet Network Adapter Card - PCIe 2.0 x4

Package Contents

• 4-Port PCIe 2.5 Gbps Network Card x 1

• Low Prole Bracket x 1

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit www.startech.com/PR42GI-NETWORK-CARD

• Host Computer with an available PCI Express 2.0 or greater Slot (x4, x8, or x16)

Installation

Install the PCI Express Card

WARNING!

Static Electricity can severely damage PCI Express Cards. Ensure that you are

adequately Grounded before you open your Host Computer Case or touch the PCI

Express Card. You should wear an Anti-Static Strap or use an Anti-Static Mat when

installing any Host Computer component. If an Anti-Static Strap isn’t available,

discharge any built-up static electricity by touching a large Grounded Metal Surface

for several seconds. Only handle the PCI Express Card by its edges and don’t touch

the gold connectors.

1. Turn o the Host Computer and any Peripheral Devices that are connected to it

(e.g. printers, external hard drives, etc.).

2. Unplug the Power Cable from the back of the Host Computer.

3. Disconnect any Peripheral Devices that are connected to the Host Computer.

4. Remove the Cover from the Host Computer Case. Consult the documentation that

came with the Host Computer for details about doing this safely.

5. Locate an open PCI Express Slot and remove the corresponding Slot Cover Plate

from the back of the Host Computer Case.

Note: Consult the documentation that came with the Host Computer for details

about doing this safely. This card works in PCI Express x4, x8, or p1-x16 Slots.

6. Gently insert the PCI Express Card into the open PCI Express Slot and fasten the

Bracket to the back of the Host Computer Case.

Note: If you install the PCI Express Card into a Small Form Factor or a Low Prole

Desktop System, it may be necessary to replace the pre-installed standard

Full Prole Bracket with the included Low Prole Bracket.

2

4

1

3

*Product may vary from image

P1

P2

P3

P4

Produktspecifikationer