StarTech.com P041GI-NETWORK-CARD Bruksanvisning
Sidor 2 Engelska Nätverkskort/adapter
Läs bruksanvisningen för StarTech.com P041GI-NETWORK-CARD gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 19 gånger. Fråga om modellen? Ställ en fråga
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: June 1, 2023
Product Diagram
P041GI-NETWORK-CARD
Port/LED/ConnectorFunction
1Bracket
• Secures the card to the Host Computer Case
• The Full Prole Bracket comes pre-installed
2Open SFP Slot x 4
• Add a MSA-Compliant SFP Transceiver Module
• Supports Fiber or Ethernet 1 Gbps SFPs
3LED Indicators
• LeftLED Indicator is Link Speed
• Solid Green: 1 Gbps
• RightLED Indicator is Link Status
• Solid Green: Active link
• Flashing Green: Activity
4PCIe 2.0 p1-x2 Connector• Insert into a PCI Express Slot on the Host Computer
Package Contents
• Open SFP Network Card x 1
• Quick-Start Guide x 1
4-Port Open SFP Gigabit Network Card
Requirements
For the latest requirements, please visit www.startech.com/P041GI-NETWORK-CARD
• Host computer with an available PCI Express 2.0 or greater slot (x2, x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING!
Static Electricity can severely damage PCI Express Cards. Ensure that you are
adequately Grounded before you open your Host Computer Case or touch the PCI
Express Card. You should wear an Anti-Static Strap or use an Anti-Static Mat when
installing any Host Computer component. If an Anti-Static Strap isn’t available,
discharge any built-up static electricity by touching a large Grounded Metal Surface
for several seconds. Only handle the PCI Express Card by its edges and don’t touch
the gold connectors.
1. Turn o the Host Computer and any Peripheral Devices that are connected to it
(e.g. printers, external hard drives, etc.).
2. Unplug the Power Cable from the back of the Host Computer.
3. Disconnect any Peripheral Devices that are connected to the Host Computer.
4. Remove the Cover from the Host Computer Case. Consult the documentation that
came with the Host Computer for details about doing this safely.
5. Locate an open PCI Express Slot and remove the corresponding Slot Cover Plate
from the back of the Host Computer Case.
Note: Consult the documentation that came with the Host Computer for details
about doing this safely. This card works in PCI Express x2, x4, x8, or x16 Slots.
6. Gently insert the PCI Express Card into the open PCI Express Slot and fasten the
Bracket to the back of the Host Computer Case.
7. Return the Cover onto the Host Computer Case.
8. Insert a compatible 1G SFP Transceiver Module, into the SFP Slot onto the PCI
Express Card.
9. Reconnect the Power Cable to the back of the Host Computer.
10. Reconnect all of the Peripheral Devices disconnected in Step 3.
11. Connect a Fiber or Ethernet Network Cable depending on the SFP Transceiver
Module used. Connect the other end of the cable to a Network Device.
3
*Product may vary from image
1
4
2
Produktspecifikationer
| Varumärke: | StarTech.com |
| Kategori: | Nätverkskort/adapter |
| Modell: | P041GI-NETWORK-CARD |
| Bredd: | 83 mm |
| Djup: | 167 mm |
| Höjd: | 38 mm |
| Förpackningens bredd: | 144 mm |
| LED-indikatorer: | Speed, Status |
| Gränssnitt: | Fiber |
| Snabbinstallationsguide: | Ja |
| Värdgränssnitt: | PCI Express |
| Maximal dataöverföringshastighet: | 1000 Mbit/s |
| Serveroperativsystem som stöds: | Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019, Windows Server 2022 |
| Full duplex: | Ja |
| Komponent för: | PC |
| PCI-version: | 2.0 |
| Produktens färg: | Svart |
| Låddjup: | 207 mm |
| Vikt inkl. förpackning: | 135 g |
| Ytterförpackningens höjd: | 320 mm |
| Produkter per ytterförpackning: | 40 styck |
| Ytterförpackningens längd: | 420 mm |
| Ytterförpackningens bredd: | 440 mm |
| Temperatur vid drift: | 0 - 50 ° C |
| Temperaturintervall (förvaring): | -10 - 70 ° C |
| Intervall för relativ operativ luftfuktighet: | 5 - 90 % |
| Anslutningsteknologi: | Kabel |
| Stöd för nätverksprotokoll: | IPv4, IPv6, TCP/UDP |
| Automatisk MDIX IEEE: | Ja |
| Kommunikationsstandarder: | IEEE 802.1AX, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3ap, IEEE 802.3az, IEEE 802.3z |
| Linux operativsystem som stöds: | Ja |
| Intern: | Ja |
| Jumboramar: | 9000 |
| Jumbo Frames stöd: | Ja |
| Fiberoptiska kontakten: | SFP |
| Fiberportar kvantitet: | 4 |
Behöver du hjälp?
Om du behöver hjälp med StarTech.com P041GI-NETWORK-CARD ställ en fråga nedan och andra användare kommer att svara dig