StarTech.com ST121UTPDVEU Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com ST121UTPDVEU (2 sidor) i kategorin AV extender. Guiden har ansetts hjälpsam av 21 personer. Har du en fråga om StarTech.com ST121UTPDVEU eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL:Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 02/07/2012

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 1xDVIExtenderLocalUnit

• 1xDVIExtenderRemoteUnit

• 2xPowerAdapter

• 1xInstructionManual

System Requirements

• DVIenabledvideosourcedevice(i.e.computer,PVR/DVR,etc)

• DVIenabledvideodisplaydevice(i.e.monitor,projector,etc)

• AvailableACelectricaloutatlocal/remotelocations

ST121UTPDVI / ST121UTPDVGB / ST121UTPDVEU

DVI Video Extender over CAT5 UTP

Installation

1.Turnothevideosource(i.e.computer)andtheintendeddisplay

device(i.e.monitor).

2.PositiontheRemoteUnitneartheintendeddisplay.

3.PositiontheLocalUnitnearthevideosource.

Please notethatbothunitswillrequireapowerconnection,so

pleaseensurethateachunitissituatednearanavailablepower

outlet.

4.Connectthevideosourcetothe“DVIIn”portontherearpanelof

theLocalUnit,usingaDVI-Dmale/malecable.

5.Connecttheintendeddisplaytothe“DVIOut”portlocatedonthe

rearpaneloftheRemoteUnitusingaDVI-Dmale/malecable.

6.ConnecttheLocalUnittotheRemoteUnit,usingstandardRJ45

terminatedCAT5cable(seePreparingYourSite).

7.Connectthepoweradapters(provided)tobothLocalandRemote

Units.

8.Turnonthedisplaydevicerst,followedbythevideosource.

Local Unit

Remote Unit

Preparing Your Site

1.Determinewherethelocalvideosource(i.e.computer)willbe

locatedandsetupthedevice.

2.Determinewheretheremotedisplaywillbelocatedandplace/

mountthedisplayappropriately.

3.Ifyouareusingsurfacecabling,ensureyouhaveenoughCat5

unshieldedtwistedpair(UTP)Ethernetcablingtoconnectthe

LocalUnittotheRemoteUnit’slocation,andthateachendis

terminatedwithaRJ45Ethernetconnector.Thecablingshouldnot

gothroughanynetworkingequipment(i.e.router,switch).

OR

Ifyouareusingpremisecabling,ensurethattheCat5unshielded

twistedpair(UTP)EthernetCablingbetweentheLocalUnitand

theRemoteUnithasbeenproperlyterminatedinawalloutletin

eachlocationandthereisapatchcablelongenoughtoconnect

theRemoteUnitandtheLocalUnittotheirrespectiveoutlets.The

cablingshouldnotgothroughanynetworkingequipment(i.e.

router,switch).

Produktspecifikationer