StarTech.com USB210AIND-USB-A-HUB Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com USB210AIND-USB-A-HUB (2 sidor) i kategorin USB-hubb. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 6 recensioner. Har du en fråga om StarTech.com USB210AIND-USB-A-HUB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 26, 2022

Product Diagram (USB210AIND-USB-A-HUB)

Front View

Rear View

Ports/PartsFunction

1DC Power Input5~24 V • Connect a +DC Power Source

2

DC 2-Wire Terminal Block

Power Input

• Connect a +5~24 V DC Power Source

3USB Type-B Host Port

• USB Type-B 480 Mbps (USB 2.0)

• Connect the to a USBHubHost Computer

4USB Type-A Ports (x 10)

• USB Type-A 480 Mbps (USB 2.0)

• Connect up to 10 USB Type A Peripheral Devices

5Mounting Holes

• Wall mount the USB Hub

• Mount the to the side/underside of a USBHub

Desk

10-Port Industrial USB 2.0 (480 Mbps) Hub - 15 kV/8 kV Air/Contact ESD Protection - Wall/DIN Rail Mountable

6

DIN Rail Mounting

Holes, Horizontal

• Used to mount the to a DIN HorizontallyUSB Hub

Rail

7

DIN Rail Mounting

Holes, Vertical

• Used to Vertically mount the to a DIN RailUSB Hub

Package Contents

• USB 2.0 Hub x 1

• DIN Rail Mounting Brackets x 2

• USB 2.0 Type-A to Type-B Cable x 1

• Screw Kit x 1

• Quick-Start Guide x 1

Requirements

For the latest product information, technical specications, manuals, and declarations of

conformance, please visit:

www.startech.com/USB210AIND-USB-A-HUB

• Flat Head Screwdriver

• Phillips Head Screwdriver

• Writing Utensil

• Level

• DC Power Source

• (Optional) Stud Finder & Electric Driver

Installation

Notes:

• Connect the after all the other installation steps have been completed. Power Source

• There are two ways to power the . USBHub

Using an external or a . DC Power Adapter Terminal Block Power SourceVoltage

(+5 - 24 V DC).

Connect the USB Ports

1. Connect the to the , USB 2.0 Type-A to Type-B CableUSB Type-B Host Port

located on the , and to a , located on the .USB HubUSB-A PortHost Computer

2. The will detect the .Host Computer’s Operating SystemUSBHub

3. Connect up to 10 to the , located on the USB Peripheral DevicesUSB Type A Ports

USB Hub.

2

1

34

567

Produktspecifikationer