Texas Instruments SN74AVC16T245DGVR Bruksanvisning

Läs gratis den bruksanvisning för Texas Instruments SN74AVC16T245DGVR (30 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 17 personer. Har du en fråga om Texas Instruments SN74AVC16T245DGVR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

To Seven Other Channels

1DIR

1A1

1B1

1OE

To Seven Other Channels

2DIR

2A1

2B1

2OE

1

47

24

36

48

2

25

13

Product

Folder

Sample &

Buy

Technical

Documents

Tools &

Software

Support &

Community

SN74AVC16T245

SCES551E– FEBRUARY2004 – REVISEDNOVEMBER2015

SN74AVC16T245 16-Bit Dual-Supply Bus Transceiver

with Congurable Level-Shifting / Voltage Translation and Tri-State Outputs

1 Features3 Description

This 16-bit noninvertingbus transceiver uses two

1

•Control Inputs VIH/VIL Levels Are Referenced toseparate congurable power-supply rails.The

VCCA Voltage SN74AVC16T245 device is optimized to operate with

• VCC IsolationFeature – IfEither VCC Input Is atVCCA/VCCB set at1.4 V to3.6 V. Thedevice is

GND, Both Ports Are in the High-Impedance Stateoperational with VCCA/VCCB as low as 1.2 V. The A

port is designed to track VCCA. VCCA accepts any

•Overvoltage-Tolerant Inputs and Outputs Allow

supply voltage from 1.2 V to 3.6 V. The B port is

Mixed-Voltage-Mode Data Communicationsdesigned to trackVCCB. VCCB accepts any supply

•Fully Congurable Dual-Rail Design Allows Eachvoltage from1.2 Vto 3.6V. Thisallows foruniversal

Port to Operate Over the Full 1.2 V to 3.6 Vlow-voltage bidirectional translation between any of

Power-Supply Rangethe 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage

• Io Supports Partial-Power-Down Mode Operationnodes.

•I/Os Are 4.6 V TolerantThe SN74AVC16T245 device isdesigned for

•Maximum Data Ratesasynchronous communication betweendata buses.

The device transmits data from the A bus to the B

–380 Mbps (1.8 V to 3.3 V Level-Shifting)bus orfrom theB busto the Abus, dependingon the

–200 Mbps (<1.8 V to 3.3 V Level-Shifting)logic levelat thedirection-control (DIR) input.The

–200 Mbps (Level-Shifting to 2.5 V or 1.8 V)output-enable (OE) input can be used to disable the

outputs so the buses eectivelyare isolated.

–150 Mbps (Level-Shifting to 1.5 V)

–100 Mbps (Level-Shifting to 1.2 V)The SN74AVC16T245 control pins (1DIR, 2DIR,

1OE, and 2OE) are supplied by VCCA.

•Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class IIDevice Information(1)

•ESD Protection Exceeds JESD 22PART NUMBERPACKAGEBODY SIZE (NOM)

–8000-V Human-Body Model (A114-A)TSSOP (48)12.50 mm × 6.10 mm

–200-V Machine Model (A115-A)TVSOP (48)9.70 mm× 4.40 mm

SN74AVC16T245

–1000-V Charged-Device Model (C101)BGA MICROSTAR7.00 mm× 4.50 mm

JUNIOR (56)

2 Applications(1)For all available packages, see the orderable addendum at

the end of the data sheet.

•Personal Electronics

• Industrial

• Enterprise

• Telecom

Logic Diagram (Positive Logic)

1

An IMPORTANTNOTICE atthe endof this datasheet addressesavailability, warranty,changes, use insafety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.

Produktspecifikationer