Texas Instruments SN74HCT273N Bruksanvisning


Läs gratis den bruksanvisning för Texas Instruments SN74HCT273N (28 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 14.5 recensioner. Har du en fråga om Texas Instruments SN74HCT273N eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/28
SNx4HCT273 Octal D-Type Flip-Flops With Clear
1 Features
Operating voltage range of 4.5 V to 5.5 V
Outputs can drive up to 10 LSTTL loads
Low power consumption, 80 µA maximum ICC
Typical tpd = 12 ns
±4 mA output drive at 5 V
Low input current of 1 µA maximum
Inputs are TTL-voltage compatible
Contain eight D-type flip-flops
Direct clear input
2 Applications
Buffer or storage registers
Shift registers
Pattern generators
3 Description
These devices are positive-edge-triggered D-type flip-
flops with a common enable input. The ’HCT273
devices are similar to the ’HCT377 devices, but
feature a common clear enable (CLR) input instead
of a latched clock.
Device Information(1)
PART NUMBER PACKAGE BODY SIZE (NOM)
SN74HCT273DW SOIC (20) 12.80 mm × 7.50 mm
SN74HCT273DB SSOP (20) 7.20 mm × 5.30 mm
SN74HCT273N PDIP (20) 25.40 mm × 6.35 mm
SN74HCT273NS SO (20) 15.00 mm × 5.30 mm
SN74HCT273PW TSSOP (20) 6.50 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Logic Diagram, (postive logic)
Logic Diagram, Each Flip Flop (positive logic)
SN54HCT273, SN74HCT273
SCLS068F – NOVEMBER 1988 – REVISED FEBRUARY 2022
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.


Produktspecifikationer

Varumärke: Texas Instruments
Kategori: Inte kategoriserad
Modell: SN74HCT273N

Behöver du hjälp?

Om du behöver hjälp med Texas Instruments SN74HCT273N ställ en fråga nedan och andra användare kommer att svara dig