Thames & Kosmos Spy Labs: Night Vision Goggles Bruksanvisning
Thames & Kosmos
ej kategoriserat
Spy Labs: Night Vision Goggles
Läs gratis den bruksanvisning för Thames & Kosmos Spy Labs: Night Vision Goggles (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 2 recensioner. Har du en fråga om Thames & Kosmos Spy Labs: Night Vision Goggles eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
© 2022 Franckh-Kosmos Verlags-GmbH & Co. KG, Pfizerstrasse 5-7, D-70184 Stuttgart, Germany
This work, including all its parts, is copyright protected. Any use outside the specific limits of the copyright law without the consent of the publisher is prohibited and punishable by law. This applies specifically to reproductions,
translations, microfilming, and storage and processing in electronic systems and networks. We do not guarantee that all material in this work is free from copyright or other protection.
Layout, typesetting, packaging, and instructions: Michael Schlegel, komuniki, Würzburg
Cover illustration: Wolfgang Peschke, Peschke Grafik Design, Ostfildern
With these night vision goggles, you are ready for anything! Observing a secret
nighttime meeting? With the magnifying lenses you can observe details even from a
distance. Searching a crime scene in the dark? No problem, thanks to the LED
headlamp on the goggles! You can also detach the headlamp and use it as a flashlight.
WARNING! Not suitable for children under 3 years. Choking hazard — small parts
may be swallowed or inhaled. Strangulation hazard —long headband may become
wrapped around the neck.
WARNING! Never look directly into the sun, either with your naked eye or through
the goggles or magnifying lenses. You could blind yourself!
WARNING! Never leave the goggles or magnifying lenses unattended in the sun.
There is a risk of fire!
WARNING! This toy does not provide protection, including sun protection.
CAUTION! This toy is not a safety protective device.
IMPORTANT! Protect the device from moisture.
Attach only the included LED headlamp to the goggles.
Keep the packaging and instructions as they contain important information.
1. How your night vision goggles work:
• An adult must install the battery. See section 2 below.
• Adjust the headband to the circumference of your head by tightening the two
ends in the clips. (See image 2.)
• Switch on the LED light in the headlamp by sliding the on/off switch on the side
of the headlamp to “ON.” (See image 2.)
• To use the headlamp as a flashlight, remove it from the goggles. To do this, twist
the headlamp up a bit and then pull it off the side of the goggles. (See image 3a.)
To attach the headlamp onto the goggles again, place it on the fastener
pointing slightly upward and twist it downward. (See images 3b, 3c, and 3d.)
• When you don’t need to use the magnifying lens and scouting scope, you can
carefully fold them up using the ratchet wheel on the goggles. (See image 2.)
Tip!
• Don’t forget to turn off the LED again when you’re not using the goggles so that
the batteries last longer.
2. How to insert and replace the battery:
• An adult should insert and change the battery.
• Use the Phillips-head screwdriver to loosen the screw on the battery compartment
and lift off the cover. The screw will remain in the cover.
(See image 1a.)
• Remove the old battery (if applicable) and insert a new AAA battery (1.5-volt, type
LR03). Pay attention to the correct polarity (+ and -). (See image 1b.)
• Close the battery compartment and screw the cover back on.
Image 1a
Image 1b
Image 2
Image 3
Battery
compartment
cover
Screw
Correct
polarity
Compartment
for 1 x AAA battery
(1.5-volt, type LR03)
Adjustable
headband
Ratchet wheel for
magnifying lens
and scouting scope
Magnifying
lens
Scouting scope
On/Off
switch for LED
3b. To reattach, line up the grooves
on the flashlight with the clips
in the socket on the headband.
3c. Slide the grooves onto the clips.
Additional information about the lamp:
Never shine the light into your eyes or
those of other living beings!
3d: Twist
downward
to attach.
3a. Twist upward and
pull to detach lamp
from goggles.
Removable
LED headlamp
LED light
Night Vision Goggles
NOTES ON DISPOSAL OF ELECTRICAL AND ELECTRONIC COMPONENTS
The electronic components of this product are recyclable. For the sake of the environment, do not throw them into the household trash at the end of their lifespan. They must be
delivered to a collection location for electronic waste, as indicated by the following symbol:
Please contact your local authorities for the appropriate disposal location.
• An adult should insert and change the batteries.
• To operate the device, you will need one AAA battery
(1.5-volt, type LR03), which could not be included in the kit
due to its limited shelf life.
• Avoid a short circuit of the batteries. A short circuit can
cause the wires to overheat and the batteries to explode.
• Different types of batteries or new and used batteries
are not to be mixed.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
• Batteries are to be inserted with the correct polarity (+
and –). Press them gently into the battery compartment.
See above.
• Non-rechargeable batteries are not to be recharged.
They could explode!
• Rechargeable batteries are only to be charged under
adult supervision.
• Rechargeable batteries are to be removed from the toy
before being charged.
Safety for Experiments with Batteries:
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Dispose of used batteries in accordance with
environmental provisions, not in the household trash.
• Avoid deforming the batteries.
• Do not leave the LED headlamp in direct sunlight or
expose it to other sources of heat.
• IMPORTANT! Protect the device from moisture. Clean it
with a damp cloth and allow it to dry thoroughly before
using it again.
Quick Start Guide:
1. An adult must install the battery before use
(see section 2 below).
2. Tighten the glasses using the headband.
3. Slide the headlamp’s power switch to “ON” to
turn on the LED light.
4. Detach the headlamp by rotating it upward for
use as a handheld flashlight.
© 2022 Thames & Kosmos, LLC, Providence, RI, USA
Thames & Kosmos® is a registered trademark of Thames & Kosmos, LLC.
Editing: Ted McGuire and Peter Bowen
Additional illustrations: Dan Freitas and Ted McGuire
Packaging artwork: Dan Freitas
Distributed in North America by Thames & Kosmos, LLC. Providence, RI 02903
Phone: 800-587-2872; Web: www.thamesandkosmos.com
We reserve the right to make technical changes.
Printed in China / Imprimé en Chine
548006-02-111022
Produktspecifikationer
| Varumärke: | Thames & Kosmos |
| Kategori: | ej kategoriserat |
| Modell: | Spy Labs: Night Vision Goggles |
Behöver du hjälp?
Om du behöver hjälp med Thames & Kosmos Spy Labs: Night Vision Goggles ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Thames & Kosmos Manualer
4 Augusti 2025
4 Augusti 2025
4 Augusti 2025
ej kategoriserat Manualer
- Rittal
- Scheppach
- Ag Neovo
- Maytronics
- Nordlux
- Orangemonkie
- Dragon Touch
- Sun Dolphin
- Neutrik
- Yoshino
- Speaka
- DJI
- Comfee
- Ulsonix
- BETAFPV
Nyaste ej kategoriserat Manualer
4 Augusti 2025
4 Augusti 2025
4 Augusti 2025
4 Augusti 2025
4 Augusti 2025
4 Augusti 2025
4 Augusti 2025
4 Augusti 2025
4 Augusti 2025
4 Augusti 2025