Thermaltake Pacific V-RX 5700 Bruksanvisning

Thermaltake Hårdvarakylning Pacific V-RX 5700

Läs gratis den bruksanvisning för Thermaltake Pacific V-RX 5700 (2 sidor) i kategorin Hårdvarakylning. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 9.5 recensioner. Har du en fråga om Thermaltake Pacific V-RX 5700 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Pacific V-RX 5700 Series Plus

VGA Water Block

Patented

16.8 Million Color

A x 1 B x 1 C D E F H I x 17 x 5 x 11 x 6 x 6 x 2G x 1

Remove the screws circled on the diagram.

Remove the backplate (Remove the screws circled

on the diagram. All heat sink assembly screws

should be removed).

Use AMD RX 5700XT as a demonstration,

other model reference the installation guide.

When installing the water block, carefully position the water block with the preinstalled standoffs

on the graphics card.

Remove the power connector(Carefully detach the original stock cooler)

Cut the thermal pads to the dimensions listed and place them on the spots shown on the diagram.

Parts List

Apply thermal compound

Clean the original thermal compound

off the GPU die

Finish

This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment.

Before you start using this product please follow these basic guidelines:

1. Please carefully read through the instruction manual before beginning the installation process.

2. Please remove your graphics card from your motherboard to insure the safest process and in order to prevent any possible damages to your CPU and motherboard.