Toa HY-MT7 Bruksanvisning
Toa
Inte kategoriserad
HY-MT7
Läs gratis den bruksanvisning för Toa HY-MT7 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 6 recensioner. Har du en fråga om Toa HY-MT7 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4

1. SAFETY PRECAUTIONS
• Beforeinstallationoruse,besuretocarefullyread
all the instructions in this section for correct and
safeoperation.
• Besuretofollowalltheprecautionaryinstructions
in this section, which contain important warnings
and/orcautionsregardingsafety.
• After reading, keep this manual handy for future
reference.
• Donotuseothermethodsthanspeciedtomount
theadapter.Extremeforceisappliedtotheadapter
andthematchingtransformercouldfalloff,possibly
resultinginpersonalinjuries.
• Tighten each nut and bolt securely. Ensure that
the adapter has no loose joints after installation
to prevent accidents that could result in personal
injury.
• Use the specied matching transformer in
combination. Doing otherwise may cause the
adapterormatchingtransformertofalloff,resulting
inpersonalinjury.
• Avoidinstallingthespeakerinlocationsclosetothe
seashore or in indoor swimming facilities that are
not well ventilated. In such locations, the adapter
maybevulnerabletocorrosion,eventuallyallowing
thematchingtransformertofallresultinginpersonal
injury.
Indicatesapotentiallyhazardoussituationwhich,
ifmishandled,couldresult inmoderateorminor
personalinjury,and/orpropertydamage.
CAUTION
• Avoid touching the adapter’s sharp metal edge to
preventinjury.
• Havetheadaptercheckedperiodicallybytheshop
from where it was purchased. Failure to do so
may result in corrosion or damage to the adapter
that could cause the matching transformer to fall,
possiblycausingpersonalinjury.
2. GENERAL DESCRIPTION
The HY-MT7 Matching Transformer Adapter is
designed to mount an optional MT-200 Matching
Transformer*totheHX-7SeriesSpeakerSystem.
* The Matching Transformer is used to convert low
impedancetohighimpedance(100Vor70Vline).
Refer to the MT-200’s Operating Instructions for
moredetails.
3. MT-200 MOUNTING ExAMPLE
Note
When joiningtwospeakersystems, a separate MT-
200 Matching Transformer must be attached to the
secondspeakersystemaswell.Themountingmethod
isthesameasthatfortheinitialspeakersystem.
INSTALLATION MANUAL
MATChING TRANSFORMER ADAPTER hY-MT7
ThankyouforpurchasingTOA’sMatchingTransformerAdapter.
Pleasecarefullyfollowtheinstructionsinthismanualtoensurelong,trouble-freeuseofyourequipment.
Indicatesapotentiallyhazardoussituationwhich,
if mishandled, could result in death or serious
personalinjury.
WARNING
MT-200
HX-7 Series speaker

Step 1. RemovetheMT-200’scover.
Step 2. Changetheprimaryconnectiontap.
ThetapoftheMT-200isfactory-presetto167Ω.
Changethesettingasrequired.
To change the tap, reconnect the primary black cord
accordingtothetablebelow.
Tap
Line 25Ω 50Ω 83Ω 167Ω
100Vline
–
200W 120W 60W
70Vline 200W 100W 60W 30W
Note: NevertouchthewhitecordconnectedtotheCOMtap.
4. MOUNTING ThE MT-200 MATChING TRANSFORMER
BeforemountingtheMT-200,layoutaprotectivesheet,corrugatedcardboardorothersoftmaterialonaat
surface,andperformallworkonthespeakerwithitsfrontbafefacingdownward.
Speaker module
Speaker system
Note
Each HX-7 Series Speaker System
consists of four speaker modules.
Tightentheboltssecurely,asinstructedbelow.
Failuretofollowinstructionspreciselycouldresultinafallingspeaker
andpotentialpersonalinjury.
• Ensurethatallboltsaresecurelyinsertedasfarastheirthreadsgo,
thensecurelyfasteneachboltwithanut.
• Tighten all the bolts with the designated tightening torque. For
tightening,useaPhillipsscrewdriver,oropen-orbox-endwrench.
WARNING
Cover
Cover fixing screw
MT-200
COM
25 50 83 167Ω Ω Ω Ω
White (–)
Black (+)

Step 3. MounttheMT-200tothisadapter.
Mount the MT-200 as shown in the gure at
right.Itscompletedinstallationisshowninthe
“MT-200MountingExample”gureonthefront
page.
Tip
BesuretokeeptheMT-200’scoverremoved.
Note
Wheninstallingspeakersystemsundereaves,
besuretoinstallinaverticalarray.Further,to
ensure the MT-200’s waterproong capability,
install it so that its top panel surface is tilted
within45ºoftheverticalplane.
If the MT-200’s waterproong capabilities
cannot be ensured by the mounting method
shown in the gure at upper right, mount the
MT-200asshownatlowerright.
Refertotheoperatinginstructionssuppliedwith
theMT-200.
MT-200 (without cover)
This adapter
Tightening torque:
8 N·m
Hex head bolt (supplied
with the MT-200)
Plain washer for M8
(accessory)
Nut for M8
(accessory)
Step 4. Mountthisadaptertotherearpanelofthespeakermodule.
This adapter can be attached to any
speaker module, however there may be
cases in which they cannot be easily
attached due to their combination with
otheroptionalmountingbrackets.Insuch
cases, attach this adapter to any free
speakermodule.
This adapter
Hex head bolt M6 x 16
(with spring and plain
washers, accessory)
Tightening
torque: 3 N·m
MT-200
45°
45°
UP
Top surface
MT-200 (without cover)
Tightening torque:
8 N·m
Hex head bolt (supplied
with the MT-200)
This adapter
Plain washer for M8
(accessory)
Nut for M8
(accessory)
Produktspecifikationer
Varumärke: | Toa |
Kategori: | Inte kategoriserad |
Modell: | HY-MT7 |
Behöver du hjälp?
Om du behöver hjälp med Toa HY-MT7 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Toa Manualer
11 December 2024
21 Oktober 2024
11 Oktober 2024
26 September 2024
26 September 2024
26 September 2024
26 September 2024
24 September 2024
24 September 2024
24 September 2024
Inte kategoriserad Manualer
- National Geographic
- Syma
- Fanvil
- Extralife Instruments
- Ranex
- Capital Sports
- Smit Visual
- Audibax
- Nokia
- OKAY
- Dynamic
- Syrp
- Café
- Akasa
- Shokz
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025