Ubiquiti Networks BM2HP Bruksanvisning

Läs gratis den bruksanvisning för Ubiquiti Networks BM2HP (40 sidor) i kategorin Åtkomstpunkt. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3 recensioner. Har du en fråga om Ubiquiti Networks BM2HP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/40
Models:
Bullet/Pico/NanoStation/loco
English
Deutsch
Español
Français
Italiano
1
Typical Deployment
English
Typical Deployment
Bullet PicoStation NanoStationloco NanoStation
LAN or Computer to
Ethernet Port labeled
LAN on PoE Adapter
Ethernet Port on
Ubiquiti Device to
Ethernet Port labeled
POE on PoE Adapter
Connect the Power Cord
to the PoE Adapter and
a power outlet
POE
Host Computer IP Address
192.168.1.x
LAN
Default IP Address
192.168.1.20
Note: Shielded Category 5 (or above) cabling should be
used for all wired Ethernet connections and should be
grounded through the AC ground of the PoE.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor
installations. It is the customer’s responsibility to follow local country regulations, including operation
within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

Produktspecifikationer

Varumärke: Ubiquiti Networks
Kategori: Åtkomstpunkt
Modell: BM2HP

Behöver du hjälp?

Om du behöver hjälp med Ubiquiti Networks BM2HP ställ en fråga nedan och andra användare kommer att svara dig