Uline H-11926 Bruksanvisning

Läs gratis den bruksanvisning för Uline H-11926 (36 sidor) i kategorin våg. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 3 recensioner. Har du en fråga om Uline H-11926 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

PAGE 1 OF 36 0825 IH-11925

1-800-295-5510

uline.com

WASHDOWN

FOOD SCALE

H-11925, H-11926

SAFETY

PARTS

WARNING! Disconnect all power to this unit

before installing, cleaning or servicing. Failure

to do so could result in bodily harm or damage

to the unit.

• Only qualified persons should service this scale.

• Do not place the scale in direct sunlight.

• Verify voltage and receptacle type are correct

for the scale.

• Do not use any other type of power adaptor

than the one designed for this scale.

• Pluggable equipment must be installed near an

easily accessible socket outlet.

• Avoid unstable power sources. Do not use

near large users of electricity, such as welding

equipment or large motors.

• Avoid sudden temperature changes, vibration,

wind and water.

• Avoid heavy radio frequency noise.

• Keep the scale clean.

TOOL NEEDED

Allen Wrench

(included)

Pan Installation Hardware

Fixed Washer x 1Screw x 2Screw x 1Seal x 1Wire x 1Plate x 1

Sealing Hardware (See "Legal For Trade" on page 8)

SETUP

PAN INSTALLATION

1. Remove stainless steel pan and plastic pan support

from carton.

2. Pull wrench (1) out from plastic pan support (4).

(See Figure 1)

3. Place fixed washer (2) on the center of

plastic pan support (4).

4. Secure fixed washer (2) with two screws (3).

5. Put the plastic pan support on the scale base.

6. Use the wrench (1) to tighten the screws (3).

7. Replace wrench (1) into slot in plastic pan support (4).

Figure 1

1

2

3

Plastic Pan Support

4

Para Español, vea páginas 13-24.

Pour le français, consulter les pages 25-36.

Produktspecifikationer