Uline H-4601 Bruksanvisning

Läs gratis den bruksanvisning för Uline H-4601 (9 sidor) i kategorin våg. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 6 recensioner. Har du en fråga om Uline H-4601 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

PAGE 1 OF 9 0625 IH-4601

H-4601

LOW PROFILE FLOOR

SCALE PRINTER

1-800-295-5510

uline.com

SAFETY

WARNING! Avoid using the printer in any harsh

environment.

• Only trained professionals are allowed to do repair

work.

• Turn power off before connecting or disconnecting

the power source.

• Do not spill liquids on the printer.

SETUP

PREPARATION

1. Carefully remove contents from the package.

2. Connect the interface cable (included) from the

printer to the RS-232 serial port of the indicator.

Tighten the screws on both sides.

NOTE: All-weather and stainless steel indicators

require hardwiring to connect to printer. See

Hardwiring instructions on page 2.

3. Turn the printer's on/off switch to the off position.

4. Plug in the power adapter from the printer to a

surge-protected power outlet.

5. Turn the printer's on/off switch to the on position.

PRINTER SETUP WITH LP-7510 / DISPLAY INDICATOR

1. With the LP-7510 display on and displaying weight,

press the PRINT and HOLD buttons at the same time

to get into Setup. Display should now show C 01.

a. Use the UNITS and COUNT buttons to move the

flashing digit left or right.

b. Use the TARE and ZERO buttons to increase and

decrease the flashing digit.

2. Change the display to show C 16 and press the

PRINT (Enter) button.

a. Display shows the date in Y/M/D format.

b. Enter the correct date and press the PRINT (Enter)

button.

3. Display shows C 17. Press the PRINT (Enter) button.

a. Display shows the time in H/M/S format.

b. Enter the correct time and press the PRINT (Enter)

button.

4. Display shows C 18. Press the PRINT (Enter) button.

a. Display shows C 18 and a number on the right.

b. Change the number on the right to "2" and press

the PRINT (Enter) button. The number 2 indicates

that the printer is connected.

5. Display shows C 19. Press the PRINT (Enter) button.

a. Display shows C 19 and a number on the right.

b. Change the number on the right to a "3" and

press the PRINT (Enter) button. The number 3

signifies the 9600 BaudRate.

Para Español, vea páginas 4-6.

Pour le français, consulter les pages 7-9.

SEL

LF

P

S

Produktspecifikationer