Uni-T UT-203R Bruksanvisning
Uni-T
Multimeter
UT-203R
Läs gratis den bruksanvisning för Uni-T UT-203R (52 sidor) i kategorin Multimeter. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 9 recensioner. Har du en fråga om Uni-T UT-203R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/52

EnglishSvenskaNorskSuomiDeutsch
UNI-T UT-203R
Digital Clamp Meter
Tångamperemeter
Tangamperemeter
Pihtiampeerimittari
Zangenamperemeter
Art.no Model
36-8126 UT-203R Ver. 20201207


3
English
Digital Clamp Meter
Art.no. 36-8126 Model UT-203R
Please read theentire instruction manual before using
theproduct and then save it for future reference.
We reserve theright for any errors in text or images
and any necessary changes made to technical data.
In theevent of technical problems or other queries,
please contact our Customer Services (see address
details on theback).
Safety
Warning:
The instruction manual contains information
necessary for thesafe operation of theclamp meter.
Disregarding this information can lead to serious
injury or death. Make sure that you have read and
understood theentire instruction manual before using
theproduct.
The clamp meter has been tested in accordance with
EN 61010-1, 61010-2-032/033 and conforms to
theelectromagnetic radiation protection standard in
accordance with EN61326-1, and also conforms to
measurement category CAT III 300 V, CAT II 600 V,
and pollution category II.
The function of theclamp meter should be checked
on aknown voltage source before you start measuring.
• Always check thethat theproduct looks intact
and has no damage before using it. Do not use
this clamp meter if it or thetest leads appear to
be damaged, or if you suspect that thetool might
not work properly.
• Never use theclamp meter if thebattery cover or
battery compartment is open.
• Make sure that your fingers are behind thefinger
guards when using thetest leads.
• Set themeasurement range with thefunction
knob before starting to take readings.
Themeasurement range must not be changed
during ameasurement.
• Do not measure voltages higher than 600 V DC
or 600 V AC RMS between apower point and
earth connection.
• Replace thebattery if thebattery warning symbol
appears on thedisplay. A weak battery can cause
incorrect results and thereby pose asafety hazard.
• Neither theclamp meter nor its accessories must
be dismantled or modified in any way.
Produktspecifikationer
Varumärke: | Uni-T |
Kategori: | Multimeter |
Modell: | UT-203R |
Färg på produkten: | Zwart |
Vikt: | 50 g |
Bredd: | 88.9 mm |
Djup: | 22.4 mm |
Höjd: | 42.9 mm |
Förpackningens vikt: | 290 g |
Förpackningens bredd: | 209.6 mm |
Djuppackning: | 52.3 mm |
Förpackningshöjd: | 141.2 mm |
LED-indikatorer: | Stroom |
Maximal upplösning: | 2048 x 1152 Pixels |
Medföljande kablar: | Micro-USB |
USB-version: | 3.2 Gen 1 (3.1 Gen 1) |
Gränssnittsadaptrar medföljer: | DVI-I male - HDMI female, DVI-I male - VGA female |
Stöder Mac-operativsystem: | Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks |
Snabbinstallationsguide: | Ja |
Medföljande drivrutiner: | Ja |
Antal skärmar som stöds: | 1 |
Utmatning av färgdjup: | 32 Bit |
HDMI-utgång: | Nee |
DisplayPort-utgång: | Nee |
DVI-utgång: | Ja |
Typ av DVI-anslutning: | DVI-I |
Behöver du hjälp?
Om du behöver hjälp med Uni-T UT-203R ställ en fråga nedan och andra användare kommer att svara dig
Multimeter Uni-T Manualer
16 Juni 2025
14 Juni 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
24 September 2024
Multimeter Manualer
- MBS
- Projecta
- Topcraft
- Velleman
- Klein Tools
- Workzone
- Elro
- PCE Instruments
- Ferm
- Yato
- Somogyi
- Wiha
- Greenlee
- Kurth Electronic
- Alecto
Nyaste Multimeter Manualer
12 Juni 2025
12 Juni 2025
12 Juni 2025
28 Mars 2025
26 Mars 2025
14 Mars 2025
14 Mars 2025
21 Februari 2025
8 Januari 2025
3 Januari 2025