Velleman MML4W Bruksanvisning
Velleman
Inte kategoriserad
MML4W
Läs gratis den bruksanvisning för Velleman MML4W (9 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 3.5 recensioner. Har du en fråga om Velleman MML4W eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/9
MML4B / MML4W 1 VELLEMAN
MML4B / MML4W – PROGRAMMABLE LED BADGE
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the MML4B / MML4W! The programmable LED badge is a magnetic name card (with safety pin)
and display badge especially designed for commercial applications. Power consumption is low and the badge is light,
compact and easy to use.
2. Features & Specifications
• LED: 19 x 5 DOT MATRIX
• storage capacity: max. 118 characters
• the display is 3 characters wide
• messages are stored when device is switched off
• slim design
• fixed with magnetic strip or safety pin
• order of the available characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789@-
/\&()$!?#*%~=+<>”.””,””,”””(SPACE) etc.
• 7 scrolling speeds + 7 brightness settings can be selected
• rear panel buttons: start/stop, enter, page up, page down
• power supply: 6VDC (2 x ) CR2016
• dimensions
• display: 48 x 10mm
• external: 62 x 31 x 12mm
• weight 35g (incl. battery)
3. Installing the Battery
Open the battery compartment according to the instructions on the cover. Insert the batteries in the battery holder
with the anode facing up and push the compartment back into the housing.
4. Use
1. magnetic strip or buckle 5. battery compartment
2. ON/OFF/ENTER
3. UP
4. DOWN
Install the 2 x 3V battery (type CR2016) and the device will
switch on the screen automatically. Turn the device off by
pressing ENTER.
Produktspecifikationer
| Varumärke: | Velleman |
| Kategori: | Inte kategoriserad |
| Modell: | MML4W |
Behöver du hjälp?
Om du behöver hjälp med Velleman MML4W ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Velleman Manualer
26 Mars 2025
3 Mars 2025
2 Januari 2025
31 December 2025
31 December 2025
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
Inte kategoriserad Manualer
- Svedbergs
- Hercules
- Dexibell
- Moldex
- Yuede
- Yato
- Logilink
- Extralife Instruments
- Maxicool
- Syma
- Bluesound
- Teia
- Gentrax
- Aconatic
- Hazet
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025