Vestil BC-4 Bruksanvisning


Läs gratis den bruksanvisning för Vestil BC-4 (11 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Vestil BC-4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/11
Beam Clamp Manual 0109 10/7/2010 update
Page 1 of 11
Copyright 2010 Vestil Manufacturing Corp.
BEAM CLAMPS
INSTRUCTION MANUAL
MODEL BC-2, -4, -6, & -8
VESTIL MANUFACTURING CORP.
2999 NORTH WAYNE STREET, P.O. BOX 507, ANGOLA, IN 46703
TELEPHONE: (260) 665-7586 -OR- TOLL FREE (800) 348-0868
FAX: (260) 665-1339
URL: WWW.VESTILMFG.COM EMAIL: SALES@VESTIL.COM
NOTE: COMPLIANCE WI TH REGULAT IONS, CODES , AND /OR ST ATUTORY (NON-VOLUNTARY) ST ANDARDS
ENFORCED IN THE LOCATION WHERE THE DEVICE IS USED IS EXCLUSIVELY THE RESPONSIBILITY OF THE END-USER. IF
LAW ENFORCED WHERE THE BEAM CLAMP IS USED CONTRADICTS AN INSTRUCTION(S) OR PART OF AN
INSTRUCTION(S), VESTIL IS NOT RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES SUSTAINED AS A RESULT.
Table of Contents Table of Figures
Product Introduction……………………………….... 2 Fig. 1A “Labeled photograph: side view”…….......................... 4
Safety Principles……………………........................ 2 Fig. 1B “Labeled photograph: top view”….............................. 5
Safety Guidelines…………………..........................
3 Fig. 2 “Product label placement”.…………….………………...10
Use Instructions……………………………………… 5-8
Maintenance Recommendations…………......
....... 9-10
Model
Beam Flang
e Width in
Inches (~cm)
Uniform
Max. Rated
Load in Pounds (~kg)
Net Weight in Pounds (~kg)
BC-2
3¼ in. to 9½ in.
~(8.2 to 24)cm
2,000 (~909kg)
18 (~8kg)
BC-4
4,000 (~1,818kg)
20 (~9kg)
BC-6
3½ in. to 12¼in.
~(9 to 31)cm
6,000 (~2,727kg)
28 (~13kg)
BC-8
8,000 (~3,636kg)
40 (~18kg)
Vestil Man ufacturing Corp. cre ated thi s man ual to acquaint p ersons a uthorized to u se a nd/or mai ntain this be am
clamp with safe u se and maintenance procedures. Employers are responsible for instructing employees to use
the product properly. Each person(s)
, who might use or perform maintenance on the beam clamp, must read
and understand every instruction BEFORE using or performing maintenance activities. Users should have
access to the manual at all times and should routinely review the directions.
Although Vestil diligently strives to identify foreseable hazardous situations, this manual cannot address every
c
onceivable danger. The end-user is ultimately responsible for exercising sound judgment at all times.
SAFETY PRINCIPLES This ma nual add resses provide s specifi cations and de scribes re commended u se a nd
maintena
nce practices. Ea ch b eam clamp conforms to the ge neralized spe cifications di sclosed i n this m anual and
fulfills our demanding standards for quality, safety and durability.
Vestil Manuf acturing Corp. recogni zes the critical im portance of workpl ace safety. Each pe rson who might
participate in the use o r maintena nce of the produ ct must re ad this manual and fully understand the directions
BEFORE using or performing maintenance on the beam clamp. If you do not understand an instruction, ask
your supervisor or employer for assistance. Failure to adhere to the directions in this manual might result in
serious personal injury or even death.
Vestil is not liable for any injury or property damage that occurs as a consequence of failing to apply either: 1) the
instructions that appear in this m anual; or 2) the i nformation provided on labels affixed to the p roduct. Furthermore,
failure to exe rcise go od ju dgment an d common sen se might result in prope rty damage, seriou s pe rsonal injury o r
death. Such injury or damage is solely the fault of the person(s) who fail to exercise good judgment; it is not another
responsibility delegated to manufacturers.
This m anual uses SIGNA L WO RDS to cla ssify pe rsonal in jury ri sks a nd situ ations that mi ght lead to p roperty
damage, a s well as t o d raw attention to safety me ssage(s). Th e re ader m ust un derstand that e ach signal word
indicates the seriousness of the described hazard.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS
INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE
injury.
Identifies practices likely to result in p roduct/property damage, such as operation that migh t damage
the beam clamp.
PRODUCT INTRODUCTION
Than
k you fo r purchasing a BC-2, -4, -6, or -8 mod el beam clamp (“beam clamp,” “BC,”
or “clamp”). These
beam clamps are durable, high-quality products rigorously engineered for
both dependability and simplicity. Alth ough use a nd mainte nance procedu res are relatively
intuitive, any person who might use or mainta in this product must be fam iliar with the
instructions provided in thi s manual. Dimensi ons and other p roduct specifications appear in
the following table:
Page 2 of 11
Copyright 2010 Vestil Manufacturing Corp.
3¼ in. to 9½ in.
~(8.2 to 24)cm
3½ in. to 12¼in.
~(9 to 31)cm


Produktspecifikationer

Varumärke: Vestil
Kategori: ej kategoriserat
Modell: BC-4

Behöver du hjälp?

Om du behöver hjälp med Vestil BC-4 ställ en fråga nedan och andra användare kommer att svara dig