Vestil SBDG-48 Bruksanvisning
Vestil
ej kategoriserat
SBDG-48
Läs gratis den bruksanvisning för Vestil SBDG-48 (3 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 2 recensioner. Har du en fråga om Vestil SBDG-48 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
6/2/2011 SBGD installation instructions.doc
SBGD SERIES
SPEED BUMP WITH GLUE-DOWN ANCHOR KIT
INSTRUCTION MANUAL
VESTIL MANUFACTURING CORP.
2999 NORTH WAYNE STREET
P.O. BOX 507, ANGOLA, IN 46703
TELEPHONE: (260) 665-7586 -OR- TOLL FREE (800) 348-0868
FAX: (260) 665-1339
URL: WWW.VESTILMFG.COM EMAIL: SALES@VESTIL.COM
NOTE: Compliance with regulations, codes, and/or statutory (non-voluntary) standards enforced in the
location where the speed bump is installed is exclusively the responsibility of the end-user.
Table of Contents Table of Figures
Product Introduction………………………... 2 Installation diagram……………...…….………… ………… 3
Safety Principles……………………............. 2
Installation Instructions………….…............ 3
Inspections & Maintenance………………… 3
1 of 3
Cop
yright 2011 Vestil Manufacturing Corp.
6/2/2011 SBGD installation instructions.doc
Dimensions and other product specifications appear in the following table:
Model
Overall width in
inches (~cm)
Overall length in
inches (~cm)
Overall height in
inches (~cm)
Net weight in
pounds (~kg)
SBGD-48 9-3/4 (~24.8cm) 47-5/8 (~121cm) 2 (~5.1cm) 22.7 (~10.3kg)
SBGD-36 9-3/4 (~24.8cm) 70-3/4 (~180cm) 2 (~5.1cm) 34.6 (~15.7kg)
SBGD-108 9-5/8 (~24.4cm) 105-3/4 (~269cm) 3-1/8 (~7.9cm) 75.7 (~34.4kg)
SBGD-D-48 11-5/8 (~29.5cm) 46-15/16 (~119cm) 2-1/2 (~6.4cm) 36.8 (~16.7kg)
SBGD-D-72 11-5/8 (~29.5cm) 70-3/8 (~179cm) 2-1/2 (~6.4cm) 55.8 (~25.4kg)
Vestil Manufacturing Corp. created this manual to acquaint owners and end-users of our speed bumps with safe
installation and maintenance procedures. Employers are responsible for instructing employees to install and
maintain the product properly. Employees and any other person
, who might install this speed bump, must
read and understand every instruction BEFOREHAND. Users should have access to the manual at all times
and should review the directions before each use.
Although Vestil diligently strives to identify foreseeable, hazardous situations, this manual cannot address every
conceivable danger. The end-user is ultimately responsible for exercising sound judgment at all times.
S
AFETY PRINCIPLES Vestil manufactures several distinct models of glue-down speed bump. Each speed
bump conforms to the generalized specifications disclosed in this manual and fulfills our demanding standards for
quality, safety and durability.
Vestil Manufacturing Corp. recognizes the critical importance of workplace safety. Each person who might
participate in the assembly, installation, use or maintenance of the product must read this manual and fully
understand the directions BEFORE installing the product and before performing maintenance on it. Failure to
adhere to the directions in this manual might lead to serious personal injury.
Vestil is not liable for any injury or property damage that occurs as a consequence of failing to heed the instructions
in this manual. Furthermore, failure to exercise good judgment and common sense may result in either property
damage or serious personal injury or both. Such failure is solely the fault of the person(s) who acted without good
judgment; it is not yet another liability of Vestil.
This manual uses SIGNAL WORDS to classify personal injury risks or situations that might lead to property damage,
as well as to draw attention to safety message(s). The reader must understand that each signal word indicates the
seriousness of the described hazard.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS
INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE
injury.
Identifies practices likely to result in product/property damage, such as operation that might damage
the speed bump.
PRODUCT INTRODUCTION
Than
k you for purchasing a series SBGD speed bump. Our speed bumps are durable, high-
quality products rigorously engineered for dependability and simplicity. Although installation and
maintenance procedures are intuitively obvious, any person who might install or maintain this
product must be familiar with the instructions provided in this manual.
Failure to re
ad and understand the instructions included in this manual before installing or maintaining the
speed bump constitutes misuse of the product. Study the entire manual before you use the product for the first
time and before each subsequent use. Read the manual to refresh, as necessary, your understanding of the safe
installation and inspection and maintenance procedures explained on p. 3. DO NOT attempt to resolve any problems with
the product unless you are authorized to do so and are certain
that it will be safe to use afterwards.
2 of 3
Cop
yright 2011 Vestil Manufacturing Corp.
Produktspecifikationer
| Varumärke: | Vestil |
| Kategori: | ej kategoriserat |
| Modell: | SBDG-48 |
Behöver du hjälp?
Om du behöver hjälp med Vestil SBDG-48 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Vestil Manualer
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
ej kategoriserat Manualer
- Hanseatic
- Orima
- Fluidmaster
- AZZA
- KeepOut
- Optimate
- Noordi
- Manhattan
- VICSEED
- OP/TECH
- Broan
- Kiloview
- Aqua-Vu
- Ultimate
- Hansgrohe
Nyaste ej kategoriserat Manualer
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025