Vimar 01975 Bruksanvisning

Vimar Inte kategoriserad 01975

Läs gratis den bruksanvisning för Vimar 01975 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 11 recensioner. Har du en fråga om Vimar 01975 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

Viale Vicenza, 14

36063 Marostica VI - Italy

www.vimar.com

49400437A0 05 2105

01975

SMART AUTOMATION BY-ME PLUS

Actuator with output 1-10 V d.c. 30 mA for driver LED control,

relay output 120-230 V 2,5 A, power supply 120-230 V~ ~

50-60 Hz, installation on DIN rail (60715 TH35), occupies 3

modules of 17.5 mm. Version for MARINE applications.

Actuator for driver LED with 1-10 V control. The device is controlled by a rocker

push-buttons. The device’s maximum output current is 30 mA.

CHARACTERISTICS.

• Rated supply voltage: BUS 29 V

• Input: 10 mA

• Auxiliary supply: 120-230 V~ ± 10%

• Consumption: 25 mA

• Dissipated power: 1,6 W

• Distance between actuator and LED driver: 10 m max with twisted cable

• Terminals:

- TP BUS

- 120-230 V~ 50-60 Hz

- relay contacts (C, NC, NO)

- control 1-10 V

• Changeover relay outputs

• Controllable loads at 120-230 V~

- resistive loads: 2,5 A (20.000 cycles)

- LED spot lights: 2,5 A (20.000 cycles)

• Operating temperature: -5 °C - +45 °C (for indoor use)

• 3 modules of 17.5 mm.

CONNECTIONS.

The wire diagram (bottom right) shows an example of a connection with an LED

driver. Depending on the type of LED driver used, the connection of terminal to L

the LED driver through the relay contacts integrated in device 01975 may not be

necessary; in this case, connect terminal directly to the electric phase.L

The feeding circuit of the relay output must be protected against overloads by a

device, fuse or automatic circuit breaker, with rated current not higher than 10 A.

CONFIGURATION.

FOR THE DETAILS OF INSTALLATION AND CONFIGURATION, SEE THE

By-me SYSTEM INSTRUCTIONS MANUAL.

• Functional blocks: 1; the block can belong to at most 4 groups.

• Selecting the functional block (configuration), when the control unit, during group

creation, requires pressing the device button:

- press the configuration button, the red LED will light up;

- with the red LED on, the control unit will configure the functional block; at the end

of this operation the red LED will go out.

PARAMETERS.

• adjustment speed: low, medium or high;

• LED always off or on only with dimmer on.

• Parameter offset: minimum output voltage adjustable from 1 to 2 V (default value

1,2 V).

• Default parameters: dimmer actuator with medium adjustment speed, LED

always off and offset of minimum output voltage.

SCENARIOS.

The actuator can belong to up to 4 different scenarios and, for each scenario, save

the status to retrieve when activating the scenario.

INSTALLATION RULES.

Installation should be carried out by qualified personnel in compliance with the

current regulations regarding the installation of electrical equipment in the country

where the products are installed.

For further instructions, please refer to the manual enclosed with the control panel.

CONFORMITY TO STANDARDS.

LV directive. EMC directive.

Standards EN 50428, EN 50491.

For MARINE use, this device has been submitted to the following tests:

IEC 60068-2-52 - Test Kb: Salt mist, cyclic (sodium, chloride solution),

IEC 60068-2-6 - Test Fc: Vibration (sinusoidal)

This device complies with part 15 of the Rules (with the limits for a Class B FCC

digital device). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesiderable

operation.

REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces

of lead.

ACTUATOR 1-10V

2,5A 120-230V

01975

120-230V 2,5A 120-230V

N L NC

1-10V BUS 30mA

By-me CONF.

FRONT VIEW AND CONNECTIONS.

Configuration Led.

Configuration button.

BUS lineConnection to

the LED driver

120-230 V~

ACT UA R 1-10VTO

2,5A 120-230V

01975

120-230V 2,5A 120-230V

N L NC

1-10V BUS 30mA

By-me CONF.

L N

LED Driver

LED

Lamp

FUSE

1-10 V

bus line

120-230 V

+ -

EXAMPLE OF CONNECTION.

WEEE - Information for users

If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be

included with other general waste at the end of its working life. The user must take the worn product to a

sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be con-

signed free of charge (without any new purchase obligation) to retailers with a sales area of at least 400 m 2,

if they measure less than 25 cm. An efﬁcient sorted waste collection for the environmentally friendly disposal

of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment

and people’s health, and encourages the re-use and/or recycling of the construction materials.

Produktspecifikationer

Varumärke:	Vimar
Kategori:	Inte kategoriserad
Modell:	01975
Typ av operation:	Touch
Färg på produkten:	Zwart
Bredd:	430 mm
Djup:	245 mm
Höjd:	180 mm
Internationell säkerhetskod (IP):	IPX4
Laddningstid:	120 min
Blåtand:	Ja
Kontinuerlig ljuduppspelningstid:	3.5 uur
Bluetooth-version:	5.0+EDR
Bluetooth-profiler:	A2DP, AAC, AVRCP, HFP, HSP
Anslutningsteknik:	True Wireless Stereo (TWS)
Medföljande kablar:	USB Type-C
Volymkontroll:	Touch
siffra:	1
Bärmetod:	In-ear
Rekommenderad användning:	Oproepen/muziek
Typ av headset:	Stereofonisch
Vikt på vänster hörsnäcka:	5 g
Vikt på höger hörsnäcka:	5 g
Impedans:	16 Ohm
Placera högtalare hörlurar:	Intraauraal
Intra-aural typ hörlurar:	In-ear monitoren
Hörlurars frekvensområde:	20 - 20000 Hz
Anslutningsområde:	10 m
Mikrofontyp:	Ingebouwd
Kontinuerlig ljuduppspelningstid (med laddningsbas/förvaringsbox):	25 uur
Säkerhetsfunktioner:	Rain proof, Sweat resistant, Water resistant
Hörlurskänslighet:	42 dB
Standbytid:	120 uur
Laddnings station:	Ja
Maximal-ineffekt:	3 mW
Laddningskälla:	Batterij/Accu
Antal mikrofoner:	4
Kontrollknappar:	Answer/end call, Play/pause, Reject call, Track <, Track >, Volume +, Volume -
Diameter på högtalaren:	6 mm
Batterikapacitet för höger öronsnäcka:	30 mAh
Batterikapacitet för vänster öronsnäcka:	30 mAh
Laddstationsmått (BxDxH)::	726 x 326 x 280 mm
Laddningsfodral:	38 g
Signal-brusförhållande:	60 dB
Designad för barn:	Nee
Typ av styrenhet:	On-ear control unit
Laddstationskapacitet:	500 mAh
Kontakttyp laddstation/förvaringsbox:	USB Type-C
Laddstation/förvaringsbox typ:	Bedraad
Drifttemperatur (TT):	-15 - 45 °C
Typ produkt:	Headset
MEMS (Micro-Electro-Mechanical System) mikrofon:	Ja
Inbyggd display (laddfodral):	Nee