VTech DS6601 Bruksanvisning

VTech Telefon DS6601

Läs gratis den bruksanvisning för VTech DS6601 (9 sidor) i kategorin Telefon. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 9.5 recensioner. Har du en fråga om VTech DS6601 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/9
1
Congratulations
on purchasing your new VTech product. Before using this telephone, please read
Important safety instructions on page 5 of this manual.
This manual has instructions on how to set up and register your new handset.
For complete instructions on using the handset, see the Abridged user’s manual
that came with your telephone base.
You may also view or download the online Complete user’s manual for a
In Canada, visit www.vtechcanada.com.
User’s manual
DS6601
DECT 6.0 accessory handset for use
with
VTech model DS6641
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing
aids and cochlear implants. The TIA-1083 Compliant Logo is
a trademark of the Telecommunications Industry Association.
Used under license.
Register online to get an additional 3-month warranty!
Visit www.vtechphones.com.
Registration
Register your product online for enhanced
warranty support.
Product news
Learn about the latest VTech products.
BC
2
Parts checklist
Your telephone package contains the following items. Save your sales receipt and
original packaging in the event warranty service is necessary.
Handset
Charger and
charger adapter
Battery
Battery compartment
cover
User’s manual
Handset battery installation
Install the battery as shown below.
Slide the battery compartment cover
towards the center of the handset
until it clicks into place.
3.
Place the handset in the handset
charger to charge.
4.
Plug the battery connector securely
into the socket.
1. Place the battery with the label
THIS SIDE UP facing up and the
wires inside the battery compartment.
2.
If the handset will not be used for a long time, disconnect and remove the battery
to prevent possible leakage.
To purchase a replacement battery, visit our website at www.vtechphones.com
or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial
1 (800) 267-7377.
CHARGE light
remains on when
charging.
User’s manual
3
Add and register a handset
You can add new handsets ( , purchased separately) to your telephone DS6601
system. Each handset must be registered with the telephone base before use.
When first purchased and properly charged, each expansion handset displays
To register HS... ...see manualand alternately. You may need to charge the
handset before registering it to the telephone base.
To register a handset:
On the telephone base, press and hold FIND HANDSET
for about four seconds until the light turns on and it IN USE
shows Registering...
On the cordless handset, press QUIET
#
then it shows
Registering... Both the telephone base and cordless
handset show and you hear a beep when the Registered
registration process completes. The registration process
takes about 60 seconds to complete.
If registration fails, the handset displays . Try again the Failed
registration process above.
Deregister handsets
If you want to replace a handset or reassign the designated handset number of a
registered handset, you must deregister all handsets and then individually register
each handset.
To deregister all handsets:
Press and hold on the telephone base for about 10 seconds FIND HANDSET
until the telephone base shows then The Registering... De-register? IN USE
light flashes.
Immediately press and release or . The MENU/SELECT FIND HANDSET
telephone base displays .Please wait
All handsets show and ... alternately when the To register HS... see manual
deregistration process completes. The deregistration process takes about
10 seconds to complete.
1.
2.
1.
2.
3.
Handset battery charging
Once you have installed the battery, the screen indicates the battery status (see the
table below).
For best performance, keep the handset in the handset charger when not in use.
The battery is fully charged after 11 hours of continuous charging.
If you place the handset in the handset charger without plugging in the battery, the
screen displays .NO BATTERY
Battery indicators Battery status Action
The screen is blank, or
shows and Put in charger
flashes.
The battery has no charge or
very little charge. The handset
cannot be used.
Charge without interruption
(at least 30 minutes).
The screen shows
Low battery and
flashes.
The battery has enough
charge to be used for a
short time.
Charge without interruption
(at least 30 minutes).
The screen shows
HANDSET X.
The battery is charged. To keep the battery charged,
place it in the handset
charger when not in use.
When it is fully charged, you can expect the following performance:
Operation Operating time
While in use (talking*) Up to 7 hours
While in speakerphone mode (talking*) Up to 3.5 hours
While not in use (standby**) Up to 5 days
* Operating times vary depending on your actual use and the age of the battery.
** Handset is not charging or in use.

Produktspecifikationer

Varumärke: VTech
Kategori: Telefon
Modell: DS6601

Behöver du hjälp?

Om du behöver hjälp med VTech DS6601 ställ en fråga nedan och andra användare kommer att svara dig