Alula RE105 Bruksanvisning


Läs gratis den bruksanvisning för Alula RE105 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 13 recensioner. Har du en fråga om Alula RE105 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
The Temperature Sensor is used to detect freeze and
overheat conditions. The sensor will alarm when the
temperature trip points are reached.
Features
Indicates freeze and overheat warnings
Industry-leading wireless range and battery life
Secure encrypted wireless transmissions
5-year warranty
Enroll the freeze input by placing the panel into wireless
enrollment mode and then sending an enrollment
signal from the sensor.
Options for sending an Enrollment Signal
Remove the battery tab and cover to trip
tamper.
To activate and enroll an overheat input,
hold down tamper and install battery.
Install by mounting the sensor in the desired location
using two #4 or #6 screws. An optional cover-securing
screw is included. Alternatively, the sensor can also be
installed using 3M™ VHB™ tape.
Freeze or Heat alarms are transmitted when the
temperature trip points are reached.
Temperature Trip Points
Heat alarms when over 100°F (38°C)
Heat restores when under 97°F (36°C)
Freeze alarms when under 45°F (7°C)
Freeze restores when over 48°F (9°C)
Pro Tips
3M™ VHB™ Tape works great if the surface is prop-
erly prepared and rm pressure is applied for over 10
seconds.
Surface Preparation
Clean the surface
Ensure the mounting surface temperature is above 50°F
Use the panel installation guide to verify proper system setup.
Mounting Screw Holes
RE105 Temperature Sensor
Interlogix
®
Compatible
I
N
S
T
A
L
L
G
U
I
D
E
I
Cover-Securing Screw Hole
Resolution Compatibles


Produktspecifikationer

Varumärke: Alula
Kategori: Inte kategoriserad
Modell: RE105

Behöver du hjälp?

Om du behöver hjälp med Alula RE105 ställ en fråga nedan och andra användare kommer att svara dig