Alula RE205 Bruksanvisning
Sidor 2 Engelska Inte kategoriserad
Läs bruksanvisningen för Alula RE205 gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 22 gånger. Fråga om modellen? Ställ en fråga
The Temperature Sensor is used to detect freeze and
overheat conditions. The sensor will alarm when the
temperature trip points are reached.
Features
• Indicates freeze and overheat warnings
• Industry-leading wireless range and battery life
• Secure encrypted wireless transmissions
• 5-year warranty
Enroll by placing the panel into wireless enrollment mode
and then sending an enrollment signal from the sensor.
Options for sending an Enrollment Signal
• Remove the battery tab and cover to
trip tamper. Select desired Loop:
• Loop 1: Overheat
• Loop 2: Magnetic reed (magnet
not included)
• Loop 3: Freeze
• Loop 4: Tamper
Install by mounting the sensor in the desired location
using two #4 or #6 screws. An optional cover-securing
screw is included. Alternatively, the sensor can also be
installed using 3M™ VHB™ tape.
Freeze or Heat alarms are transmitted when the
temperature trip points are reached.
Temperature Trip Points
• Heat alarms when over 100°F (38°C)
• Heat restores when under 97°F (36°C)
• Freeze alarms when under 45°F (7°C)
• Freeze restores when over 48°F (9°C)
Use the panel installation guide to verify proper system setup.
Mounting Screw Holes
RE205 Temperature Sensor
Honeywell
®
Compatible
I
N
S
T
A
L
L
G
U
I
D
E
I
Cover-Securing Screw Hole
Resolution Compatibles
Pro Tips
3M™ VHB™ Tape works great if the surface is properly prepared and rm pressure is
applied for over 10 seconds.
Surface Preparation
• Clean the surface
• Ensure the mounting surface temperature is above 50°F
Produktspecifikationer
| Varumärke: | Alula |
| Kategori: | Inte kategoriserad |
| Modell: | RE205 |
Behöver du hjälp?
Om du behöver hjälp med Alula RE205 ställ en fråga nedan och andra användare kommer att svara dig